Cleaning speaker grille covers - method? - Page 2

Dave***t · 4th December 2008, 17:17

Ah, do they just pop off by any chance? I haven't gone so far as to try, given that my luck with breaking things has never been too good!

Rob75 · 4th December 2008, 17:34

there acctually joined to the door card with plastic pins that have had the tops melted to form a head.

what i did was cut the tops of the pins off and then drilled a very small hole in the top of the pin and secured them on with very small self tappers and washers.

Richiemd · 25th February 2009, 07:37

Hi took me three attempts to get them looking nice, used 1001 cleaner (the can of mouse with the built in brush) came up a treat in the end just persevere allowing them to dry between treatments, Its well worth it.

4th December 2008, 17:17	#11
Dave*t Gets stuck in MG ZT+ 180 SE** Join Date: Mar 2007 Location: Birmingham Posts: 646 Thanks: 0 Thanked 1 Time in 1 Post	Ah, do they just pop off by any chance? I haven't gone so far as to try, given that my luck with breaking things has never been too good! __________________ [SIGPIC][/SIGPIC]

4th December 2008, 17:34	#12
Rob75 Gets stuck in Jaguar Join Date: May 2008 Location: wellington, somerset Posts: 905 Thanks: 0 Thanked 0 Times in 0 Posts	there acctually joined to the door card with plastic pins that have had the tops melted to form a head. what i did was cut the tops of the pins off and then drilled a very small hole in the top of the pin and secured them on with very small self tappers and washers. __________________ [SIGPIC][/SIGPIC]

25th February 2009, 07:37	#13
Richiemd Avid contributor 2001 2.5 V6 Connoisseur Join Date: Feb 2009 Location: Kidlington Posts: 155 Thanks: 0 Thanked 0 Times in 0 Posts	Hi took me three attempts to get them looking nice, used 1001 cleaner (the can of mouse with the built in brush) came up a treat in the end just persevere allowing them to dry between treatments, Its well worth it.