|
|
|
|
|
|
||
|
|
||
20th December 2019, 19:51
|
#1 |
|
Loves to post
Rover 75 Saloon & MGZT 190 Join Date: Jun 2012
Location: Leek
Posts: 390
Thanks: 333
Thanked 57 Times in 39 Posts
|
Mg 190 V6 throttle body question
Hi Everybody
I have recently had a high revs on cold start 1500 rpm when cold and drops to about 750 rpm when warm,I used the Rimmers gasket set and seal, Cleaned everything but didnt look dirty, Can somebody tell me exactly what the white plastic part actually does ?? as I replaced it but it was tight to push in and another member mentioned it should move freely, the gasket sits on top so how does it move ?? The cold start was 1100 after i fitted the kit but has returned to 1500 on cold start and i was wondering exactly what the white plastic piece actually does as mine is not freely moving after opening it up again. any ideas please julian
__________________
This vehicle was the 53,401st 75 to run off the production line, out of 112,381 This vehicle was the 2,551st 75 CDT Club to be made out of 3,403 This vehicle was the 5,192nd 75 in White Gold Metallic (code: GMN) to be made out of 12,251 White Gold Metallic 75s My New Addition MGZT 190 Trophy Blue 2001 Petrol. |
|
|
 |
|
|
Linear Mode
