|
||
|
7th May 2017, 09:29 | #1 |
Posted a thing or two
MG ZT 1.8T, MG GS Exclusive Join Date: Apr 2013
Location: Grays Essex
Posts: 1,809
Thanks: 100
Thanked 282 Times in 205 Posts
|
Volunteer wanted: 75/ZT 1.8T owner to visit Emerald (Norfolk)
Hi guys
I'm after a bit of help that will hopefully benefit anyone with a 75/ZT 1.8T that wants to move over to a fully integrated (including can bus!) plug and play aftermarket ECU. Here's a little background to the ask... I'm in the process of installing my forged K turbo engine (standard crank though) and the tuning capability of the standard MEMS3 ECU doesn't appear to be up to the task of 350+bhp. As a result, I've been looking into ECU options - however, the biggest stumbling block is the can bus. To that end, I've been talking with the tech department at Emerald and have sent them a spare ECU to tinker with. From their investigations, it would appear that the can bus used is the same as a BMW E46 / Mini going by the minimal bench test he has been able to carry out. They are quite confident that their K6 with can bus emerald ECU will work as a direct replacement to the MEMS3 ECU because they've already written the necessary code into their product for the E46/Mini. To be 100% sure, they would like to plug into a running 75/ZT 1.8T. They won't need to tinker or change anything on the ECU, they simply need to take live readings. My problem is, I don't have a running ZT/75 1.8T to pop with down with. With that in mind, would someone be so kind as to go on my behalf? Their address is as follows: Emerald M3D Limited Unit 6 Norwich Rd Industrial Estate, Watton, Norfolk IP25 6DR Let me know if you've any questions and if you can help. Cheers James
__________________
Stage two 1.8T build |
7th May 2017, 09:44 | #2 |
Posted a thing or two
mg zt Join Date: Mar 2014
Location: cardigan
Posts: 1,087
Thanks: 28
Thanked 187 Times in 158 Posts
|
Prommissing progress, mine is definately not running, and I'm the other side of the country...
If this works it might tempt me to use it to run my zt t series. I would really be interested in what you've done to the k for it to withstand 350bhp - how about a thread on it? Also, pm for you. Last edited by minimutly; 7th May 2017 at 09:50.. |
7th May 2017, 10:25 | #3 |
This is my second home
2005 Connoisseur SE 1.8 Turbo,2004 45 1.8 Connoisseur and my beloved 1998 VVC Coupe. Join Date: Nov 2009
Location: Derby.
Posts: 8,810
Thanks: 2,022
Thanked 1,016 Times in 739 Posts
|
Member crown is in Norwich about 25 miles away from Watton and he has a 1.8T.
He is interested in the performance side so may be prepared to help.Drop him a pm
__________________
|
8th May 2017, 20:56 | #4 | ||
Posted a thing or two
MG ZT 1.8T, MG GS Exclusive Join Date: Apr 2013
Location: Grays Essex
Posts: 1,809
Thanks: 100
Thanked 282 Times in 205 Posts
|
Quote:
I've had my K turbo completely rebuilt from scratch using the usual balanced forged comments, VVC head with the goodies like custom piper cams, bigger injectors etc. The real thing when it comes to the K series is the map and Mems3 just doesn't give you the absolute control to really tweak everything. This is how you get big power safely. There's a chap who's taken a standard K turbo to 350bhp+ in his Elise via an Emerald set up and I'll be working with him to do the same on mine. However, I'll have three maps - a safe and daily 300bhp... and then a ballsy 350 and 380 just because. However, nothing is certain until the dyno prints in. I did have a build thread but I kinda let it slip as I recently moved house and am refurbishing it. Maybe I'll kick it off again. Cheers PS. Your inbox is full Quote:
Cheers
__________________
Stage two 1.8T build Last edited by Pistonbroke666; 8th May 2017 at 20:58.. |
||
8th May 2017, 22:07 | #5 | |
This is my second home
2005 Connoisseur SE 1.8 Turbo,2004 45 1.8 Connoisseur and my beloved 1998 VVC Coupe. Join Date: Nov 2009
Location: Derby.
Posts: 8,810
Thanks: 2,022
Thanked 1,016 Times in 739 Posts
|
Quote:
If a car like this had been available from the factory it would have given the company a whole new image in the eyes the buying public.And who know's how that might have changed MG-R's long term future.
__________________
|
|
9th May 2017, 08:37 | #6 | |
Posted a thing or two
MG ZT 1.8T, MG GS Exclusive Join Date: Apr 2013
Location: Grays Essex
Posts: 1,809
Thanks: 100
Thanked 282 Times in 205 Posts
|
Quote:
God knows how she'll drive hehe.
__________________
Stage two 1.8T build |
|
9th May 2017, 09:36 | #7 |
This is my second home
2005 Connoisseur SE 1.8 Turbo,2004 45 1.8 Connoisseur and my beloved 1998 VVC Coupe. Join Date: Nov 2009
Location: Derby.
Posts: 8,810
Thanks: 2,022
Thanked 1,016 Times in 739 Posts
|
__________________
|
9th May 2017, 09:48 | #8 | |
Gets stuck in
Rover 75 1.8 Connie SE Join Date: Dec 2015
Location: Vindolanda, Northumberland
Posts: 541
Thanks: 111
Thanked 153 Times in 105 Posts
|
Why not just go to the master of K series maps, Mark at Kmaps ?
Quote:
As for the E46 CANBUS, we could have told you that! Ali.
__________________
|
|
9th May 2017, 14:27 | #9 | |
Posted a thing or two
MG ZT 1.8T, MG GS Exclusive Join Date: Apr 2013
Location: Grays Essex
Posts: 1,809
Thanks: 100
Thanked 282 Times in 205 Posts
|
Quote:
I am familiar with K Maps, my old engine was running the 200bhp set up. Thing is, my car will be continually evolving and needing further mapping work - sticking with MEMS3 would work out very expensive in the long run plus I wouldn't have the fine tuning capabilities that an Emerald has. Regarding the Canbus, fill me in and tell me all you know hehe. James
__________________
Stage two 1.8T build |
|
9th May 2017, 18:01 | #10 |
Posted a thing or two
mg zt Join Date: Mar 2014
Location: cardigan
Posts: 1,087
Thanks: 28
Thanked 187 Times in 158 Posts
|
Pm box now cleared
|
|
|