|
||
|
7th May 2016, 20:57 | #1 |
Avid contributor
MG ZT-T Join Date: Feb 2016
Location: Wisbech
Posts: 168
Thanks: 16
Thanked 29 Times in 22 Posts
|
Header K109 location,
Ok. I cannot find this for love nor money, I've traced the wire from the LCM that should go into it and it just goes up into the loom behind the dials.
I only have two headers at the bottom of the drivers A pillar. Neither have any wires to do with the brake lights in. |
7th May 2016, 22:36 | #2 |
Doesn't do things by halves
Rover 75 2.5 Connoisseur Auto (1999) Dealer launch model. Join Date: Mar 2007
Location: Former Middlesex
Posts: 20,511
Thanks: 1,587
Thanked 3,749 Times in 3,181 Posts
|
I've found it James. It's connector C0286:
Pin 9 = switch, brake pedal (pin 4) & ECM Pin 10 = LSM (pin 25) Pin 11 = ECU ABS Give me a minute and I'll try to locate this connector for you. Update: It's a grey 20 pin connector behind the LHS of the fascia. From the photograph, it is sealed in heat shrunk plastic. I don't think this is going to help James. Simon
__________________
"Whatever is rightly done, however humble, is noble." Sir Henry Royce. Last edited by SD1too; 7th May 2016 at 22:51.. |
7th May 2016, 23:02 | #3 |
MG ZT Join Date: Jan 2011
Location: Newcastle Upon Tyne
Posts: 20,151
Thanks: 3,565
Thanked 10,837 Times in 5,718 Posts
|
|
|
|