|
||
|
29th January 2016, 09:51 | #1 |
Newbie
Rover 75 Saloon Join Date: Jan 2016
Location: Devon
Posts: 5
Thanks: 0
Thanked 2 Times in 1 Post
|
Fitting xtrons custom fit inplace of hiline
Hi
Had the dreaded water in spare wheel issue that has killed the radio receiver / TV tuner. I have been looking at all the options e.g. repairing, upgrading to BM 24 / 54 etc. Then I came across this and wondered if it would fit? http://xtrons.co.uk/pf-7146b-gtd-7-1...-3-series.html I have done a search and couldn't see anyone had done it. I assume as people upgrade the 4:3 screen to the 16:9 from an E46 that this should fit (maybe with a bit of cutting required!?). May have to check the gap at hte back of the unit will fit too. From what I understand there should be an ISO connection behind the current hiline unit in the dash and I would need to extend the aerial connection from the boot forward to the dash? I would probably get a camera as well at the same time wire that in too. Hopefully someone out there may be able to help. Also if there is a better system than the one I found then let me know! Thanks |
29th January 2016, 11:05 | #2 |
I really should get out more.......
None Join Date: Sep 2010
Location: N/a
Posts: 2,108
Thanks: 1,369
Thanked 551 Times in 386 Posts
|
Nav3
Hi
I fitted a Td717g xtrons with all the bells a whistles at the time but for that money you would probably be better off buying a Nav 3 from Radioguy with the back up from Coolcat Regards Steve Last edited by steveo; 29th January 2016 at 16:25.. |
29th January 2016, 16:44 | #3 | |
I really should get out more.......
Now Other Manufacturer Join Date: Nov 2006
Location: Co. Kerry
Posts: 2,786
Thanks: 16
Thanked 310 Times in 283 Posts
|
Quote:
You would need an extension cable, from the connector behind the ashtray unit, that has ISO connectors. Last edited by raykay; 29th January 2016 at 16:48.. |
|
30th January 2016, 11:21 | #4 |
Gets stuck in
None at moment Join Date: May 2013
Location: Loughborough
Posts: 899
Thanks: 230
Thanked 125 Times in 113 Posts
|
Depends on how long the harness that comes with the Xtrons is. I didn't need an extension for my Navall1 that replaced the highline because the supplied harness was long enough.
|
|
|