|
||
|
||
|
![]() |
#1 |
Loves to post
Rover 75 SE Join Date: Sep 2013
Location: Medway Towns
Posts: 311
Thanks: 0
Thanked 11 Times in 7 Posts
|
![]() Hi all
Blipped the keyfob and the drivers door unlocked, pulled handle but door won't open. Had to get in passenger side and climb over and use the door lever inside which still opens the door. Is this another common fault and any ideas with regard to a fix if a common problem, are the doorcards easy to get off? Thanks Mark |
![]() |
![]() |
![]() |
#2 |
Newbie
MG ZT-T Join Date: Apr 2013
Location: Chard
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
|
![]() Had the same issue myself recently.
Before you go stripping the door to pieces, with the door locked, pull the handle out and spray some WD40 in the gap where the linkage comes out. I did this and seems to have solved the issues. |
![]() |
![]() |
![]() |
#3 |
Loves to post
Rover 75 SE Join Date: Sep 2013
Location: Medway Towns
Posts: 311
Thanks: 0
Thanked 11 Times in 7 Posts
|
![]() Thanks for tip BarryG i'll get someWD40 in there and see what happens.
Regards Mark |
![]() |
![]() |
![]() |
#4 |
Loves to post
Rover 75 SE Join Date: Sep 2013
Location: Medway Towns
Posts: 311
Thanks: 0
Thanked 11 Times in 7 Posts
|
![]() WoooooooHooooooooooo!!!!
![]() ![]() I now have a working drivers door lock without having to pull all the door etc card off. Thank you very much for the WD40 trick it works a treat. Have a happy Christmas "BarryG"- all the best!! Mark |
![]() |
![]() |
![]() |
|
|