Rear Door 1/4 finishers replacement (saloon)

keeftheduck · 6th June 2012, 19:40

Hi guys,

Can anyone out there shed some light as to how to replace the rear door 1/4 finishers. I have some coming soon all being well and as yet haven't been able to find a thread on their replacement.

Thanks in anticipation

pab · 6th June 2012, 21:47

I presume your changing to a pair of these.

It's easy enough,remove the single cross head screw which is visible with the rear door open.

Once the screw is removed the finisher is held in place by about six clips which press into plugs in the bodywork.

Gently working from the bottom pull the finisher away from the body.

The top of the finisher slips into the chrome roof line trim,just gently pull it out..

Refitting is in the reverse order.

keeftheduck · 7th June 2012, 15:36

Thanks Pab...I think I should be able to manage that...sounds a lot easier than the xenons!

6th June 2012, 19:40	#1
keeftheduck Loves to post Rover 75 SE Saloon 1.8 Join Date: Apr 2012 Location: Mirfield Posts: 264 Thanks: 2 Thanked 1 Time in 1 Post	Rear Door 1/4 finishers replacement (saloon) Hi guys, Can anyone out there shed some light as to how to replace the rear door 1/4 finishers. I have some coming soon all being well and as yet haven't been able to find a thread on their replacement. Thanks in anticipation __________________ [SIGPIC][/SIGPIC] I'm going to keep the red one...

7th June 2012, 15:36	#3
keeftheduck Loves to post Rover 75 SE Saloon 1.8 Join Date: Apr 2012 Location: Mirfield Posts: 264 Thanks: 2 Thanked 1 Time in 1 Post	Thanks Pab...I think I should be able to manage that...sounds a lot easier than the xenons! __________________ [SIGPIC][/SIGPIC] I'm going to keep the red one...

6th June 2012, 21:47	#2
pab Banned MG ZT V6 190+ Join Date: Sep 2008 Location: Leeds Posts: 33,223 Thanks: 41 Thanked 1,614 Times in 1,416 Posts	I presume your changing to a pair of these. It's easy enough,remove the single cross head screw which is visible with the rear door open. Once the screw is removed the finisher is held in place by about six clips which press into plugs in the bodywork. Gently working from the bottom pull the finisher away from the body. The top of the finisher slips into the chrome roof line trim,just gently pull it out.. Refitting is in the reverse order.