|
||
|
12th April 2016, 10:18 | #1 |
Gets stuck in
2003 Rover 75 Club SE CDT manual saloon Join Date: May 2015
Location: sunderland
Posts: 900
Thanks: 73
Thanked 199 Times in 123 Posts
|
B pillar trim.
I took the trim off the B pillar on my 75 to service a sticky seatbelt and now i cant get the B pillar trim to stay on is there a knack to doing it as i cant get it to stay on. Any help will be appreciated.
Thanks Colin. |
12th April 2016, 11:55 | #2 |
Posted a thing or two
Rover 75 Saloon MGZT Join Date: Jul 2012
Location: Perth, AUSTRALIA
Posts: 1,667
Thanks: 3
Thanked 461 Times in 299 Posts
|
There is a knack !!! You need to position the automatic belt slider trim bit so it sits completely flat over the bits (seat belt bolt head) under the B panel so the outer trim panel can clip in.As I recollect, remove the rubber door trims around the B pillar area,need to get the bottom of the trim to clip into the top of the bottom panel.
They kind of lock together on an angle. Last time I removed the whole top and bottom part of the panels,clipped them together,then re fitted the whole panel together. The plastic "airbag" trim plug is a pain to remove and replace also. |
12th April 2016, 13:20 | #3 | |
Gets stuck in
2003 Rover 75 Club SE CDT manual saloon Join Date: May 2015
Location: sunderland
Posts: 900
Thanks: 73
Thanked 199 Times in 123 Posts
|
Quote:
|
|
Thread Tools | |
Display Modes | |
|
|