Wiring for Hizpo 2 din radio

genpk · 18th March 2018, 05:39

Bought a 2 din radio branded Hizpo for my diesel.
Pretty cheap and really good for the money.
The unit I got was listed as for an E49 Bmw but fitted well once you remove the two extra nylon mounting tags.
Only issue is very little in the way of wiring instructions apart from the one on the top of the unit outlining what the units 20 pin plug goes to.
Decided to make a wiring loom to fit the two Rover 75 ISO plugs and wired really well.
Following are wiring pins for the iso plugs
The brown Rover iso plug is all for the speakers.
ISO pin 1 to +rr pin 3 +rf. pin5 +lf. pin 7 +lr
pin 2. -rr. pin 4. -rf. pin6 -lf. pin 8 -lr

The black iso plugs is for power etc
ISO Pins 1,2 and 3 are not connected
Pin 4 - Acc power (red wire)
Pin 5- antena (blue wire - connect to blue wire on unit)
Pin 6 - illumination (orange wire on unit)
Pin 7- Battery voltage (yellow wire on unit)
Pin 8- earth ground.

Steering wheel controls
Brown wire on unit marked Key 1 wire to Rover blue / purple wire.
Wire the other Rover steering control wire (blue/orange) to pin 8 ( earth) on the unit.
Hope this may help some one if they buy the same unit.
The code to access the boot up logo is 8888.
Gives you access to a number of brand logos including MG or Roewe unfortunately no Rover logo.
Trying to figure out if we can add a Rover logo to the nenu

18th March 2018, 05:39	#1
genpk Posted a thing or two Rover 75 Saloon MGZT Join Date: Jul 2012 Location: Perth, AUSTRALIA Posts: 1,675 Thanks: 3 Thanked 461 Times in 299 Posts	Wiring for Hizpo 2 din radio Bought a 2 din radio branded Hizpo for my diesel. Pretty cheap and really good for the money. The unit I got was listed as for an E49 Bmw but fitted well once you remove the two extra nylon mounting tags. Only issue is very little in the way of wiring instructions apart from the one on the top of the unit outlining what the units 20 pin plug goes to. Decided to make a wiring loom to fit the two Rover 75 ISO plugs and wired really well. Following are wiring pins for the iso plugs The brown Rover iso plug is all for the speakers. ISO pin 1 to +rr pin 3 +rf. pin5 +lf. pin 7 +lr pin 2. -rr. pin 4. -rf. pin6 -lf. pin 8 -lr The black iso plugs is for power etc ISO Pins 1,2 and 3 are not connected Pin 4 - Acc power (red wire) Pin 5- antena (blue wire - connect to blue wire on unit) Pin 6 - illumination (orange wire on unit) Pin 7- Battery voltage (yellow wire on unit) Pin 8- earth ground. Steering wheel controls Brown wire on unit marked Key 1 wire to Rover blue / purple wire. Wire the other Rover steering control wire (blue/orange) to pin 8 ( earth) on the unit. Hope this may help some one if they buy the same unit. The code to access the boot up logo is 8888. Gives you access to a number of brand logos including MG or Roewe unfortunately no Rover logo. Trying to figure out if we can add a Rover logo to the nenu Last edited by genpk; 18th March 2018 at 05:42..