|
||
|
|
23rd March 2022, 16:55 | #1 |
Avid contributor
Rover 75 Saloon Join Date: Jun 2018
Location: Ballynahinch
Posts: 194
Thanks: 69
Thanked 60 Times in 23 Posts
|
undertray fitting
How I dread the instruction--- Remove the undertray. You know that's the easy part. The difficult part is refitting the b'lasted thing. I have found the only way is to use plenty of bad language and eventually it gets the message.
Does anybody know of a nice gentlemanly or ladylike way of doing this. It really would make my day. Fred |
23rd March 2022, 17:22 | #2 |
Avid contributor
Rover 75 Saloon Join Date: Feb 2012
Location: Rotherham
Posts: 233
Thanks: 107
Thanked 73 Times in 46 Posts
|
Hi Fred
When I refit mine, I use a box or similar that the undertray can rest on an inch or two below the fixing points. This item needs to be appropriate dependant on the height you have the car lifted. I then start at the front and put in all the fixings across the car and then work backwards towards the rear, inserting them as you go. Works for me anyway! Howard |
23rd March 2022, 18:02 | #3 |
Loves to post
Rover 75 CTDi Contemporary SE Join Date: Jul 2013
Location: Stretton-under-Fosse, Warwickshire.
Posts: 359
Thanks: 54
Thanked 134 Times in 83 Posts
|
Is there any reason why it is a bad idea to run without an undertray? Mine doesn't have one fitted, I presume it came out of the factory with one but it wasn't there when I bought the car nine years ago and I can't say that its absence has caused me any great inconvenience.
If anything I would regard one as a hindrance as I suspect it would tend to mask fluid leaks which I would be better off knowing about but perhaps I'm missing something obvious? |
23rd March 2022, 18:08 | #4 | |
This is my second home
Rover 75 Saloon & Tourer Join Date: Sep 2012
Location: Lincoln
Posts: 14,963
Thanks: 1,630
Thanked 3,032 Times in 2,181 Posts
|
Quote:
I think a lot of people dont have the undertray fitted and survive macafee2 Last edited by macafee2; 23rd March 2022 at 20:36.. |
|
23rd March 2022, 18:18 | #5 |
Regular poster
Rover 75 Saloon Join Date: Aug 2020
Location: Dorset/Hampshire border
Posts: 56
Thanks: 27
Thanked 10 Times in 6 Posts
|
I don't have an undertray but I cut/bent a piece of aluminium sheet to shape to go under the area with pulleys, belts, belt driven stuff and used the undertray fixings to secure it. I thought this was the most vulnerable area and it hasn't stopped me getting access to anything I've needed.
|
24th March 2022, 08:37 | #6 |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,792
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Only one way if you have to do it on your drive, car onto ramps, then re-fit by lying on your back with the undertray on your belly, put the front into the under side of the bumper, then reach to the very back and put the two turn buckles in, then the tray is balanced up, then do the other fixings.
1
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
1st April 2022, 08:56 | #7 | |
Gets stuck in
75 Join Date: Mar 2013
Location: UCKFIELD
Posts: 502
Thanks: 35
Thanked 122 Times in 85 Posts
|
Quote:
|
|
2nd April 2022, 09:44 | #8 |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,792
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
Under Tray Removal & Fitting.
Car on ramps.
1 Four front 8mm fixing removed. 2 Next i remove the four centre fixing 10mm 3 3a That then leaves the tray hanging between the front being inside the front bumper, and the rear still held up by the two buckle turn fixings. 4 Lower the tray to the floor as i slide from under it on my back. 5 Reach down and pull tray out from under the car. 6 Tray set to one side out of the way. 7 I then set about changing out the front ramps for my higher ramps, as these cannot be driven up. 8 Jack each side up and slide the higher ramps in place. 9 10 Then i raise the rear of the car to put the smaller ramps under the rear wheels, as i will be working under the car this weekend. 11 Checking for up and coming mot.
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
30th March 2022, 22:08 | #9 | |
This is my second home
Rover 75 cdt club + Rover 2.5 KV6 Conni SE Join Date: May 2008
Location: Birmingham
Posts: 11,426
Thanks: 6,587
Thanked 2,262 Times in 1,729 Posts
|
Quote:
__________________
Great Barr, Birmingham. |
|
30th March 2022, 22:47 | #10 |
Give to Learn
Freelander 2 Join Date: Aug 2010
Location: West Midlands
Posts: 18,792
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
|
I will be taking mine off in the next day or two so will do photo shoot of how i do it not saying you have to follow my way though.
__________________
Arctic Givology Learn to Give Everything is Achievable ad altiora tendo. Check out our Nano meet dates http://www.midlandsnanomeets.co.uk/ http://www.the75andztclub.co.uk/index.php?thepage=howto " You do the work , we supply the expertise " |
|
|