|
||
|
25th July 2021, 16:32 | #1 |
Posted a thing or two
Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016
Location: Oakenshaw, Near Bradford
Posts: 1,624
Thanks: 385
Thanked 552 Times in 328 Posts
|
MG ZT Diesel back box
Would I be right in thinking the ZT Diesel back box has slightly longer tail pipes?
__________________
Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s |
26th July 2021, 21:14 | #2 |
Gets stuck in
R75 CDTi Auto Conn SE Mk1 Saloon Join Date: Feb 2010
Location: Crowthorne, Berkshire
Posts: 665
Thanks: 190
Thanked 64 Times in 54 Posts
|
Not sure if they are longer, but I think the ZT has straight pipes and pokes through a cutout in the bumper, and the 75 has curved down pipes which don't touch the bumper. (The tourer has longer pipes from the backbox)
__________________
The only 75 with a non-factory fitted, factory fitted sunroof!!!! |
27th July 2021, 14:44 | #3 |
This is my second home
2007 57 GOLF GTi EDITION 30 DSG Join Date: Nov 2011
Location: Newport Shropshire and Coventry.
Posts: 5,147
Thanks: 2,424
Thanked 1,452 Times in 852 Posts
|
Looking at various ZT diesels I've seen after the factory one has given up the new aftermarket exhausts look to be shorter and sit behind the bumper instead of coming out in the cut out.
|
27th July 2021, 18:43 | #4 | |
Posted a thing or two
Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016
Location: Oakenshaw, Near Bradford
Posts: 1,624
Thanks: 385
Thanked 552 Times in 328 Posts
|
Quote:
I'm planning on cutting the hole in my 75 bumper and fitting the trim. However, I don't want my tailpipes hidden , they will need to be a bit longer, hence the question about the ZT box. From what I understand, the diesel pipes have to be downturned. Looks like I'll be going down the custom stainless exhaust route to get the look I'm after. Obviously being a Rover, they need to be polished stainless . I have already sanded and polished the rear bumper trim so it looks like chrome lol
__________________
Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s Last edited by Mike Trident; 27th July 2021 at 18:57.. |
|
|
|