75 tourer connoisseur finisher

mbev51 · 15th May 2017, 08:02

Hi
A chrome finisher at bottom of the LH boot glass has become a bit loose and is now catching when rear door is opened. I cannot identify the part on Rimmers website. It doesn't seem to be in the diagram, it's after the rear door, below the glass. It goes all around the glass although there seems to be a join in it.

https://www.rimmerbros.co.uk/Item--i-GRID001804

I don't want to touch it until I know more about parts availability. Can secondhand parts be removed from breakers and fitted successfully? Has anyone any experience of this, thanks.

suffolk boy · 15th May 2017, 08:18

i do not think it was ever available as a separate part.only when i bought a new glass for my ztt or sixth light to use the correct term the trim came with it.
it is held in by clips behind the glass.the clips fit into lugs on the trim.if it was mine i would put it in the correct place then get some body sealant behind it to hold it in place.tiger seal springs to mind good luck

mbev51 · 15th May 2017, 08:27

Thanks Suffolk boy for your quick reply. I will do as you suggest.

15th May 2017, 08:02	#1
mbev51 Banned Removed Join Date: Dec 2013 Location: Removed Posts: 1,343 Thanks: 171 Thanked 315 Times in 223 Posts	75 tourer connoisseur finisher Hi A chrome finisher at bottom of the LH boot glass has become a bit loose and is now catching when rear door is opened. I cannot identify the part on Rimmers website. It doesn't seem to be in the diagram, it's after the rear door, below the glass. It goes all around the glass although there seems to be a join in it. https://www.rimmerbros.co.uk/Item--i-GRID001804 I don't want to touch it until I know more about parts availability. Can secondhand parts be removed from breakers and fitted successfully? Has anyone any experience of this, thanks.

15th May 2017, 08:18	#2
suffolk boy This is my second home fiat panda Join Date: Sep 2009 Location: haverhill Posts: 6,720 Thanks: 96 Thanked 586 Times in 526 Posts	i do not think it was ever available as a separate part.only when i bought a new glass for my ztt or sixth light to use the correct term the trim came with it. it is held in by clips behind the glass.the clips fit into lugs on the trim.if it was mine i would put it in the correct place then get some body sealant behind it to hold it in place.tiger seal springs to mind good luck __________________ fiat panda 1.2 eco

15th May 2017, 08:27	#3
mbev51 Banned Removed Join Date: Dec 2013 Location: Removed Posts: 1,343 Thanks: 171 Thanked 315 Times in 223 Posts	Thanks Suffolk boy for your quick reply. I will do as you suggest.