|
||
|
8th June 2009, 12:58 | #1 |
Newbie
rover 75 1.8t saloon se Join Date: Mar 2009
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
June 2003, 1.8 T Conn SE
Recently had HG replaced, the later improved part, however still losing coolant and my garage (ex Rover main dealer) appears unable to rectify despite 5 attempts. Does anyone know would HG fail again if coolant level falls too low, or could end result be a lot worse? If i make a sixth visit to my garage what should i ask/demand?
|
8th June 2009, 13:04 | #2 | |
Occasional interested visitor
Kia SOUL EV Join Date: Aug 2008
Location: Glasgow
Posts: 4,251
Thanks: 35
Thanked 27 Times in 14 Posts
|
Quote:
Hi Paddy. It is often helpful to note where in the country you are located as then local members may be able to suggest a suitable specialist near you. If the HG is failing again that might suggest a warped head. I am not technical though so will leave it to the more experienced members to guide you. Best of luck. Derek
__________________
Vauxhall Ampera Scottish Members Guestmap here. Just click on your location to add a marker. Last edited by derekosb; 8th June 2009 at 13:05.. Reason: spelling |
|
8th June 2009, 13:44 | #3 |
Newbie
rover 75 1.8t saloon se Join Date: Mar 2009
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
June 2003, 1.8 T Conn SE
Cheers Derek
I live in Co Antim, N Ireland. As part of original job the head was skimmed, also the car is still under the dealers warranty. They are happy to make the repair, but just dont seem able to do it properly. To date i have returned the car 5 times, but the problem still exists and i have a fear of a serious breakdown on a long trip. Thanks again. |
8th June 2009, 13:53 | #4 |
Banned
180+ Sport Auto Join Date: Oct 2006
Location: Bedford Middle Level
Posts: 17,787
Thanks: 0
Thanked 18 Times in 5 Posts
|
You can usually tell where a leak may be by the tell tale red colour left by evaporating OAT coolant. The HG will fail again if the engine overheats so keep a close eye on what's going on.
The garage should be able to pressure test the system to locate any leak. Could always be the header tank lid as well they wear out and need replacing. |
8th June 2009, 14:55 | #5 |
Newbie
rover 75 1.8t saloon se Join Date: Mar 2009
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
|
Many thanks for your help.
|
|
|