View Single Post
Old 19th September 2018, 11:02   #7
Number 6
This is my second home
 
Rover 75 tourer Club CD/Limo Tints

Join Date: Nov 2008
Location: Meneac
Posts: 6,759
Thanks: 5,007
Thanked 1,609 Times in 869 Posts
Default

Quote:
Originally Posted by Rick-sta View Post
You'll either need to get the cluster virginised and then programmed in with a t4 or toaf, or swap the eeprom chip from your old cluster to the new one (assuming both are highline clusters).

If you plug it straight in without doing this the wrong mileage will show on the cluster (it will show the mileage of the donor car you removed the cluster from) and you will also see "ERR" on the trip display due to a vin mismatch.

Bare in mind that if you have a later reg car and have removed the cluster from an early car, the instrument cluster won't support your parking sensors, so your parking sensors won't work if you have sensors fitted. Early cars had the parking sensor sounder fitted at the rear of the car, later car's had the sounder as part of the instrument cluster.


Thanks for the information.....Nothing is simple is it...I will check first and make sure that the display is line free and then when I am over in the UK again (end of the year) I will get it on a T4.

Any suggestions as who can do it nearest to the Midlands ??
__________________
]

"I started out with nothing, and Ive still got most of it left!"
Number 6 is offline   Reply With Quote