The 75 and ZT Owners Club Forums - View Single Post

lektrix · 22nd June 2017, 12:43

Hello Pete, typical isn't, them locking tools are not cheap either. I did have an extension on the socket but it was the locking tool that was the problem. There is no where for the handle of it to go except downwards which is ok if you have the car up on a 4 poster ramp. Mine was just up on stands. Since the job has taken so long it wasn't too much extra hassle removing the bumper. Glad it is done now. I was worried about being able to finish the job because several people had taken a look and a hammer had been used and damaged the castellated part of the pulley. I had to grind away and knock back into shape much of it. Thanks again.

22nd June 2017, 12:43	#24
lektrix Newbie Rover 75 Saloon Join Date: Jun 2017 Location: Leicester Posts: 12 Thanks: 0 Thanked 1 Time in 1 Post	Thank you.... Hello Pete, typical isn't, them locking tools are not cheap either. I did have an extension on the socket but it was the locking tool that was the problem. There is no where for the handle of it to go except downwards which is ok if you have the car up on a 4 poster ramp. Mine was just up on stands. Since the job has taken so long it wasn't too much extra hassle removing the bumper. Glad it is done now. I was worried about being able to finish the job because several people had taken a look and a hammer had been used and damaged the castellated part of the pulley. I had to grind away and knock back into shape much of it. Thanks again.