The 75 and ZT Owners Club Forums - View Single Post - KV6 Oil pickup O-Ring ?

Mgaz · 2nd November 2019, 15:55

My ZT190 always sounds noisy when first started from cold. Its an 02 plate and I've seen from reading threads on here that I might need a new oil pick up O-ring in the sump.

ITEM: O Ring - LYX000210L https://rimmerbros.com/Item--i-LYX000210L

I don't know for certain if this will cure the problem but I'm willing to give it a shot.

Is it easy enough to remove the sump and replace the O-ring?

Also, it looks as though there isn't a sump gasket on the KV6, rather some sealant instead? .

Looking at rimmers prices, that seems excessively expensive

https://rimmerbros.com/Item--i-LVV005188

Is there an inexpensive alternative?

2nd November 2019, 15:55	#1
Mgaz Gets stuck in MG ZT190, MG ZS TD, MGF VVC, R200 TD bubble, Austin A35 Join Date: May 2017 Location: shrewsbury Posts: 648 Thanks: 530 Thanked 82 Times in 56 Posts	KV6 Oil pickup O-Ring ? My ZT190 always sounds noisy when first started from cold. Its an 02 plate and I've seen from reading threads on here that I might need a new oil pick up O-ring in the sump. ITEM: O Ring - LYX000210L https://rimmerbros.com/Item--i-LYX000210L I don't know for certain if this will cure the problem but I'm willing to give it a shot. Is it easy enough to remove the sump and replace the O-ring? Also, it looks as though there isn't a sump gasket on the KV6, rather some sealant instead? . Looking at rimmers prices, that seems excessively expensive https://rimmerbros.com/Item--i-LVV005188 Is there an inexpensive alternative? __________________ They say you should never meet your Idols. Well.... you know that car you always wanted? https://www.youtube.com/channel/UCGx...zZeAsYRU9aZu-A ^Be kind, Subscribe^ (MGR videos )