The 75 and ZT Owners Club Forums - View Single Post - Mater or slave? Clutch to the floor 75 CDTI

kurtDeVos · 27th January 2023, 10:11

I had to abandon my 75 in Cumbria on the new years due to the clutch peddle going to the floor, it started as the peddle not popping back up but would work when pulled back up for a while then it just eventually stopped working all together.

I filled the master with some fluid but after some pumping nothing is coming from the bleed nipple on the gear box. I am due to go up there later today and swap out the master cylinder with a new one to see if it works but I thought I would ask you guys to see if it was more likely the slave which would probably mean a wasted journey and possibly the end for the 75.

Chaars

27th January 2023, 10:11	#1
kurtDeVos Regular poster Rover 75 Join Date: Dec 2014 Location: Ascot / Roosendaal Posts: 80 Thanks: 2 Thanked 2 Times in 2 Posts	Mater or slave? Clutch to the floor 75 CDTI I had to abandon my 75 in Cumbria on the new years due to the clutch peddle going to the floor, it started as the peddle not popping back up but would work when pulled back up for a while then it just eventually stopped working all together. I filled the master with some fluid but after some pumping nothing is coming from the bleed nipple on the gear box. I am due to go up there later today and swap out the master cylinder with a new one to see if it works but I thought I would ask you guys to see if it was more likely the slave which would probably mean a wasted journey and possibly the end for the 75. Chaars