Quote:
Originally Posted by Arctic
Hi Simon.
The ones I have in the shed also lean a little, if you press on them a pull to one side they straighten up.
I note you have the Indian arms was it not those that Brian mentioned that the drain holes were in the wrong place ?
|
Thanks for the pics Steve.
Ok re the weird angle - I'll give that a try when I'm ready to put them on the car. At the moment I'm stuck on the fuel tank refit - post 13
here. I can't figure out what goes in those guides and clips, which I can't even see because the wood support blocks are slap bang in the way, plus it's raining
.
I don't know about the Indian arm question - I never read the thread containing Brian's thoughts on it. The arms came from Mat in March 2017. I'll compare their drain positions with the old factory arms once I've sorted out the fuel tank problem (assuming I do that is).
Quote:
Originally Posted by macafee2
yes, rotate the rubber and spring as the spring I think will only sit properly on the rubber in one location. See post 1, combine with my reply it will sit differently once on the upper arm and in place.
......
|
Ok Ian - thanks for the info.