Quote:
Originally Posted by Blink
Have a look at this one TC - https://rimmerbros.com/Item--i-FS108207L - it holds the small handbrake bracket ,#9 here https://rimmerbros.com/Item--i-GRID001570. Its says 20mm for that one - the one I've taken off is about 18mm.
The bracket I'm talking about is quite a serious affair - about 3in long with a flange and a grommet for the hose to pass through - it must have a p/n. If it does, the screw will too. |
I suspect the FS108207L is a substitute for the 18mm fitted originally . If the 20mm doesn't bottom out there is no issue using it . FS will be a flange head screw . An 18mm one would be FS108187L . I believe the 7 is for Dacromet finish . Rimmers list a FS108181L which I think is the same size with just Zinc Chromate finish not Dacromet. .