The 75 and ZT Owners Club Forums - View Single Post

bearhouse · 24th February 2019, 12:00

Hi Dave,

I have looked at the white gear and there is definitely one tooth knackered. However, the motor doesn't turn once the ignition us turned to position 1.

I have removed the motor plug and there is 10.5 volts on the plug with ignition turned to position 1. That doesn't seem right as I would have thought should be 12V. I'm assuming not a fuse but possibly a relay contact. Do you know which relay to check?

Regards,

Terry.

24th February 2019, 12:00	#4
bearhouse Regular poster Rover 75 Join Date: Aug 2009 Location: Herts Posts: 83 Thanks: 0 Thanked 0 Times in 0 Posts	Traction Control Fault / Fail Hi Dave, I have looked at the white gear and there is definitely one tooth knackered. However, the motor doesn't turn once the ignition us turned to position 1. I have removed the motor plug and there is 10.5 volts on the plug with ignition turned to position 1. That doesn't seem right as I would have thought should be 12V. I'm assuming not a fuse but possibly a relay contact. Do you know which relay to check? Regards, Terry.