Hi.
Actually I think Ken's suggestion isn't so silly. OK I know about water and electrics but in this scenario it could be to advantage. If the machine goes on fire we would hope the power could be removed, burning cables will hopefully short out blowing the 13a plug fuse or tripping the RCD.
There is no guarantee though this will happen. If the machine does get hot enough to melt a thin plastic container filled with water then it could get into the electrics of the machine to trip the RCD, it also could buy some time before the fire becomes disastrous.
I think Ken its a perfectly valid idea.
__________________
Cheers from Trevor
MM0KJJ
|