Quote:
Quote:
Originally Posted by sworks
I’ve parked the 75 up and it will sit there until I’ve replaced the pipe and I’m happy. I removed the pipe at the servo pipe one way valve as this was the easiest to get to. The bore was around 4mm but the pipe felt quite hard and brittle, I cut the end off and the internal diameter was closer to 3mm so I will go with Steve’s suggestion of 4.5mm
|
|
Hi Mark.
My 4.5mm pipe vacuum hose arrived today, I test fitted it to the EGR solenoid which the hose goe's from there to valve, its fits really nice with out have to push to hard, the 3.2 is very hard to fit and stretches when trying to fit so not really the best for this purpose cheers Arctic.
1
2