The 75 and ZT Owners Club Forums - View Single Post

MWMan · 3rd January 2016, 11:03

Goeff / Mike

thanks for the further info. I did finally manage to get the side panel off using a bit of brute force to get the panel to come out from under the spare wheel cover. The Haynes manual was pretty good at walking me through the removal except as you say the quality of the photos. Once I got in there, I managed to get the plug out of the ecu and tested the voltages as suggested by Daznkel. Pins 1-6 and 12-6 both had 12v on them. It sounds like my next step will be to pull out the sensors and test them. ( I might wait for better weather !).

thank you both for your information

John

3rd January 2016, 11:03	#6
MWMan Loves to post Rover 75 Tourer Join Date: Oct 2015 Location: Bishop's Stortford Posts: 418 Thanks: 210 Thanked 289 Times in 124 Posts	Goeff / Mike thanks for the further info. I did finally manage to get the side panel off using a bit of brute force to get the panel to come out from under the spare wheel cover. The Haynes manual was pretty good at walking me through the removal except as you say the quality of the photos. Once I got in there, I managed to get the plug out of the ecu and tested the voltages as suggested by Daznkel. Pins 1-6 and 12-6 both had 12v on them. It sounds like my next step will be to pull out the sensors and test them. ( I might wait for better weather !). thank you both for your information John