Hi Jeff,
No, the connection is okay, the TMPS has his own unit, very small one, the videolead from the reverse camera goes in there and the video lead that comes out, so both signals, the tirepressure and reverse, goes into the unit in reverse input.
It's made this way so when the unit is off and I start the car, the TMPS sends a signal to the unit to wake it up, gives a screen with the tirepressure and degrees and after a few seconds it turns off. When I goes in reverse, the TMPS unit sends that signal to the unit, the unit wakes up and gives me the view from the rear camera.
At this situation a have a good screen.
The same when the unit is on, but than the TMPS doesn't have to wake the unit . . . because it is allready on.
At this situation I miss the bottom lines.
When you look here and scroll down you see a picture of the small TMPS unit with connections.
http://www.75andzt.com/index.php?rou...product_id=102
Sean is going in here with the factory's to see what the problem is.
Gerard
Hope I explained it well
