the anti reversing back out frame the red one just clips on. as for the green wire that goes over. for some strange reason when i fitted mine i think it went to the ipk plug .but this was about nine years ago.if it does go the lsm i imagine remove the lower dash panel plus the surround above it this pulls off btw and you should be able to get to the plug.oh back to the fuse board it is also held on by two nuts 8mm i think on each corner.undo pull the board pull forward then turn it you then be able to poke the wire in the back.if you cannot work out from the rear which one poke something through the relevant position from the front so you can see.hope this helps
__________________
fiat panda 1.2 eco
|