The 75 and ZT Owners Club Forums - View Single Post - how to change all your leds ipk switches etc blue conversion

galaxyclass · 8th November 2013, 15:04

Some excellent pics there gazza, well done.

Strange how you had to replace the 10 resistors in the ipk, I didn't and mine seem to be the perfect brightness, I can only assume your LEDs have a different tolerance to then ones I bought. The only resistor I replaced was the one in series with red up arrows on the ATC as I found that they looked very dim compared to the others.
Interesting how you mounted the plcc2s in the switches, certainly easier than drilling the back out with a dremmel and 1mm drill bit.
I can also vouch for the maplin soldering station, I have the same one and it is very good for the price.

Nice work.

8th November 2013, 15:04	#9
galaxyclass Posted a thing or two MG ZT+ 190 Join Date: Apr 2012 Location: Manchester Posts: 1,047 Thanks: 119 Thanked 59 Times in 58 Posts	Some excellent pics there gazza, well done. Strange how you had to replace the 10 resistors in the ipk, I didn't and mine seem to be the perfect brightness, I can only assume your LEDs have a different tolerance to then ones I bought. The only resistor I replaced was the one in series with red up arrows on the ATC as I found that they looked very dim compared to the others. Interesting how you mounted the plcc2s in the switches, certainly easier than drilling the back out with a dremmel and 1mm drill bit. I can also vouch for the maplin soldering station, I have the same one and it is very good for the price. Nice work. __________________ Mods done - Spyhole mod - Xenons - Blue dash lights (except message centre) - VIS indicators - Illuminated sun visors - Drivers grab handle - Smiley plate - Rear electric blind - Handbrake compensator. Mods to do - Powerfolds - Better ICE - Headlight washers - Heated seats - cruise - And loads more i can't remember. [SIGPIC][/SIGPIC]