[jonc3725]

Electrics.

Although mot difficult there are some electrics to run in on the rear suspension.

Firstly the rear suspension light height sensor was fitted. I refurbed the brackets, replaced the switch and changed the arms which were seized on the ball joints.

IMG_20191231_211403 by Jon Christie, on Flickr

Next up I ran in the new ABS sensors.

The connector is under the rear seat and the line runs through the floor to the underneath

IMG_20200102_210923 by Jon Christie, on Flickr

The sensor was fitted into the back of the hub. I had to clear the hole to fit the sensor.

IMG_20200104_205619 by Jon Christie, on Flickr

IMG_20200102_212428 by Jon Christie, on Flickr

The cabling run through new clips in the original position along with the pad wear sensor to the passenger side.

IMG_20200102_212444 by Jon Christie, on Flickr

IMG_20200102_212544 by Jon Christie, on Flickr

Thats the electrics complete