The 75 and ZT Owners Club Forums - View Single Post

Mike Trident · 24th May 2020, 14:45

You guys have made me think about it.

Making my own, i could actually utilise the slight slope in my driveway. If I make the base fit the slope of the drive, I could give myself a lot more space underneath the car. I would only need perhaps 6 inches of raise on the top. This would of course make driving a low car onto it much easier.

Cheers guys!

Thanks Xavier, some of the equipment on the CJ site is amazing.

24th May 2020, 14:45	#7
Mike Trident Posted a thing or two Rover 75 CDTi Saloon & Citroen C1 Join Date: Jun 2016 Location: Oakenshaw, Near Bradford Posts: 1,622 Thanks: 385 Thanked 552 Times in 328 Posts	You guys have made me think about it. Making my own, i could actually utilise the slight slope in my driveway. If I make the base fit the slope of the drive, I could give myself a lot more space underneath the car. I would only need perhaps 6 inches of raise on the top. This would of course make driving a low car onto it much easier. Cheers guys! Thanks Xavier, some of the equipment on the CJ site is amazing. __________________ Rover 75 2.0 CDTi (131Ps) Conn SE Saloon. (Manual) 160 Remap, cruise control, electric window blind, temp gauge, Real walnut / ZT interior, FBH with GSM control. BORN Tuesday, 5th October 2004 @ 12:35:52 This vehicle was the 104,679th 75 to run off the production line, out of 112,381 This vehicle was the 3,318th 75 CDT Connoisseur SE (135) to be made out of 4,744 This vehicle was the 12,440th 75 in Starlight Silver (code: MBB) to be made out of 14,280 Starlight Silver 75s Last edited by Mike Trident; 24th May 2020 at 14:54..