View Single Post
Old 1st August 2021, 22:41   #9
Arctic
Give to Learn
 
Arctic's Avatar
 
Freelander 2

Join Date: Aug 2010
Location: West Midlands
Posts: 18,716
Thanks: 1,155
Thanked 6,407 Times in 3,874 Posts
Default

[QUOTE]
Quote:
Originally Posted by AX52 HKY View Post
Now I never even gave that a thought.... where is that on these?[/QUOTE
]

Crankcase breather is just in front and a little under the air filter, remove the main engine cover.
1

Then remove the air duct.
2

Next remove the air filter cover, allen key start with the rear corner OS.
3

Then near side corner.
4

5

Three along the top.
6

Lift it free.
7

Now remove the three torx holding the injector wiring, a 5mm socket works on these, this car had posi screws.
8

Open the clips on the ends, and pull of the plugs.
9

Lift wiring out of the way.
10

You can now tackle the PCV filter again allen key.
11

Some just lift out others you have to remove the leak back hose from the injectors, first pull off the spring clips.

12

13

Do three, then tease up the T joints or use some pliers and pull upwards.
14

Now lift the PCV out with the filter in one.
15

Change it for a new filter, i already had one made up with a spare case.
16

Before refitting change out the seals.
17

18

Fit new filter replace all you removed in reverse.
19

Hopefully it's not as bad as this one was, cheers Arctic.
__________________
Arctic
Givology Learn to Give
Everything is Achievable

ad altiora tendo.

Check out our Nano meet dates
http://www.midlandsnanomeets.co.uk/

http://www.the75andztclub.co.uk/index.php?thepage=howto

" You do the work , we supply the expertise "
Arctic is offline   Reply With Quote