When the tensioner nut on one of mine was overtightened and couldn't be removed, I had to take the handbrake off the car and into the kitchen in order to use a pair of wire cutters to remove the short cable and the nut. There are 3 bolts, similar to the seat rail torx bolts, holding the handbrake in place. It might be that one or more of those has somehow come loose.
I admit this is most unlikely as the bolts themselves are very tight in their sockets.
There are 2 bolts on top, and one down the side. Lifting the centre consol gives access to them all, although I think that 1 on top can be checked from the handbrake well.
Piccie attatched.
Hope this helps.
__________________
Mo was born Tuesday, 22nd June 2004 @ 08:32:41
This vehicle was the 99,307th 75 to run off the production line, out of 112,381
This vehicle was the 5,377th 75 1.8 Connoisseur to be made out of 6,033
This vehicle was the 783rd 75 in Firefrost Red (code: CEV) to be made out of 2,089 Firefrost Red 75s
Last edited by madeupname; 28th April 2019 at 20:07..
|