Quote:
Originally Posted by Kev75
Make sure the bottom one leaves the drain holes clear on the arm.
Kev
|
Kev - does this look right to you?
Here's the top of the upper arm with the isolator pushed into the locating socket and lined up with the drain holes.
Now, without changing anything, here's the arm turned over to show the bottom side.
The two locking lugs on the isolator are at 10 past 6 - is this fully locked into position, or should the lugs be at 6 o'clock to be fully locked? (the drain holes won't line up if it's at 6 o'clock
).