The 75 and ZT Owners Club Forums - View Single Post

pugcrew · 14th January 2018, 16:08

Due to a leak I need to replace the short length of pipe that runs through the flexible rubber tube that is visible when you open the glass hatch only.

Firstly I think the washer pipe runs through the left rubber tube but can anyone confirm this?

Secondly does anyone have any advice on replacing this short length of tube? It looks like it will be a PITA to disconnect the rubber tube and I suspect that feeding a new washer pipe through the rubber tube will also be a PITA. Does anyone have any tips on doing this?

Finally, I have read some posts on here where people have removed the rear washer jet and found that the 'grommet' that holds the jet breaks into a number of pieces. Do I need to remove the jet or can I simply remove the washer pipe from the jets while they are in place?

14th January 2018, 16:08	#1
pugcrew Avid contributor none Join Date: Apr 2016 Location: Seaford Posts: 146 Thanks: 0 Thanked 3 Times in 3 Posts	Rear washer pipe on Tourer Due to a leak I need to replace the short length of pipe that runs through the flexible rubber tube that is visible when you open the glass hatch only. Firstly I think the washer pipe runs through the left rubber tube but can anyone confirm this? Secondly does anyone have any advice on replacing this short length of tube? It looks like it will be a PITA to disconnect the rubber tube and I suspect that feeding a new washer pipe through the rubber tube will also be a PITA. Does anyone have any tips on doing this? Finally, I have read some posts on here where people have removed the rear washer jet and found that the 'grommet' that holds the jet breaks into a number of pieces. Do I need to remove the jet or can I simply remove the washer pipe from the jets while they are in place?