19th April 2019, 20:48
|
#2
|
|
This is my second home
Rover 75 cdt club + Rover 2.5 KV6 Conni SE
Join Date: May 2008
Location: Birmingham
Posts: 11,396
Thanks: 6,587
Thanked 2,262 Times in 1,729 Posts
|
Quote:
Originally Posted by macafee2
My FBH pcb seems to keep going into lock out and removing fuse 8 does not unlock it.
It was repaired, worked then locked out. It was unlocked, worked then again seems to have locked out... wont fire up.
I'm have been earthing pin 3 to use it so the car is warm before I start it
Glow plug has been tested and was found to be ok.
What values should I get if I test the water pump and fan?
Anything else I should be testing?
Seems repairing is more expensive then replacing 
macafee2 |
Hi Ian. Was talking to Trebor yesterday while he was fitting a switch for me and my friend’s cars about fbh. Evidently the glow plug is used to make two diagnosis, so it may read ok , but might not make the second diagnosis correctly. I would get in touch with Trebor or Stocktake to carry out a test on both functions for you..
__________________
Great Barr, Birmingham.
|
|
|