The 75 and ZT Owners Club Forums - View Single Post

Al75 · 3rd January 2022, 20:02

I've an airbag light that,s refusing to go out. I have a 2005 diesel model with only 70,000 miles. I know its a common problem on Rover 75,s and most problems are caused by the connections under the front seats. I've taken out the connections and soldered the joints and insulated them. Unfortunately this has failed to solve the problem.
After reading accounts of other people who,s had similar problems. I think its likely that the problem lies with side impact sensors or the airbag ECU. I have a few questions that more knowledgeable members may be able to help with.

(1) I haven't as yet seen the airbag impact sensors my car has fitted. Im not
sure where they are located. Can the impact sensor be removed without
removing the seats?

(2) Which impact sensor should I fit, as far as I can see there are two types
green or yellow.

(3) If I have to fit a new airbag ECU, my understanding is, it will need a T4 to
set it up. Can anyone recommend someone who can do this. I dont mind
traveling.

Any other suggestions or information are welcome, as I need to get to the bottom of the problem before the MOT expires.
Thanks in advance.

3rd January 2022, 20:02	#1
Al75 Newbie Rover 75 Saloon Join Date: Nov 2020 Location: Stockton-on-Tees Posts: 27 Thanks: 3 Thanked 4 Times in 3 Posts	Airbag light issue I've an airbag light that,s refusing to go out. I have a 2005 diesel model with only 70,000 miles. I know its a common problem on Rover 75,s and most problems are caused by the connections under the front seats. I've taken out the connections and soldered the joints and insulated them. Unfortunately this has failed to solve the problem. After reading accounts of other people who,s had similar problems. I think its likely that the problem lies with side impact sensors or the airbag ECU. I have a few questions that more knowledgeable members may be able to help with. (1) I haven't as yet seen the airbag impact sensors my car has fitted. Im not sure where they are located. Can the impact sensor be removed without removing the seats? (2) Which impact sensor should I fit, as far as I can see there are two types green or yellow. (3) If I have to fit a new airbag ECU, my understanding is, it will need a T4 to set it up. Can anyone recommend someone who can do this. I dont mind traveling. Any other suggestions or information are welcome, as I need to get to the bottom of the problem before the MOT expires. Thanks in advance.