Apologies for the confusion Simon, I just replaced the silver resistor which was connected from the relay box's red wire (which was spliced into 2, whereby 1 goes to the resistor whereas the other 1 was left detached). The replaced Gold resistor then continues its connection in a grey wire looped back into the relay.
The resistor is not in anyway connected to the fan motor. It is just connected on a loop from the relay box and then back into the relay box. Does the resistor need to be connected to the fan motor?
Apologies for turning Sunday into a manic one 😅
Quote:
Originally Posted by SD1too
Apologies Steve for jumping in but this is a fascinating puzzle!
The thick red wire exiting the control box was earthed at the open chassis box section but, as you say, became detached during dismantling. This earthed wire by-passed the control box relays.
Zickleer, please confirm to which colour wires you have connected the resistor and where those wires go. I can't tell from the photographs.
Simon
|