Quote:
Originally Posted by Rich in Vancouver
Ah, when I did my brakes I remember using my 18mm socket for the first time.
For some reason socket sets have 18s but not wrench sets-Go figure?
There must have been a German infiltrator in the design office.
|
Rich, you will need one of
THESE to make your life easier
And take a look
HERE
This describes the fitting of the rear bush in isolation, however the removal method of the M14 bolts with the 18mm A/F heads is pertinent whether replacing the bush, or the whole arm, the main difference being the reassembly method as you will be doing the job on axle stands presumably.
Brian