Quote:
Originally Posted by macafee2
I have no idea but does Rimmers web site parts list show anything?
macafee2
|
Not really, the parts themselves just levitate in mid air, like
this - and the only diagram of the relevant underfloor area is
this one. I think the #3 is the correct 'box section' but you can't see the bolt holes properly anyway.
Quote:
Originally Posted by marinabrian
For mounting the fuel oil cooler on diesel models
Brian
|
Ah, that'll be it - the cooler must be slightly longer than the charcoal canister, which has one bolt at the rear end and a hook at the front (the hook goes into a rectangular hole in the box section).
Quote:
Originally Posted by Arctic
|
The bolt visible on the rear end of the cooler in this pic must use the same hole as the bolt on the rear end of the canister. Then the bolt on the front end of the cooler (#8
here) must go into the mystery hole.
So I leave it empty then. Thanks chaps.