Quote:
Originally Posted by MissMoppet
No juice coming through from horn wire connector: wiring disappears up behind bonnet switch. Does the feed come off that?
|
Your first idea is on the money Dave. There's no need to remove the bonnet switch. Trace its supply wire, yellow/brown, back to connector C1227/C1228. This connector also carries the supply to the horn which is the only component fed by fuse 31.
The bonnet switch is supplied separately by the BCU.
Simon
__________________
"Whatever is rightly done, however humble, is noble."
Sir Henry Royce.
Last edited by SD1too; 23rd November 2019 at 12:00..
|