[QUOTE]
Quote:
Originally Posted by trikey
Just in case anyone is interested, I fitted a petrol mount to my diesel over two years ago and all is fine!![/QUOTE
|
]
Hi Andy.
I fitted the one below to my tourer and the top alloy bracket would not line up properly at first then when i moved the engine a little it was still 15mm out, i have just purchased a FL1 mount which fits right all it needs is the top thread reducing by about 10mm
1
AS you can see the original one had failed, it also as the letter J stamped into the bottom.
2
Lucky i had an old one from someone else's car that i had fitted an original too.
So will be doing the 2.5 hour plus job again in near future.
The housing must be fitted also on the diesel.