The 75 and ZT Owners Club Forums - View Single Post

klarzy · 18th June 2016, 11:08

If it comes on and goes out Harry then the static test has passed (i.e. the wiring loop is complete to each sensor so plugs etc should be ok).
If the light comes on and stays on then some part is open circuit or ecu / modulator issue
If the light goes out then comes on after pulling away then at least 1 of the ABS sensors is not returning the pulses in line with the others which points to sensor head / Reluctor ring on at least 1 wheel....

18th June 2016, 11:08	#8
klarzy This is my second home none but not gone Join Date: Mar 2013 Location: March, Cambs Posts: 16,437 Thanks: 894 Thanked 4,247 Times in 3,025 Posts	If it comes on and goes out Harry then the static test has passed (i.e. the wiring loop is complete to each sensor so plugs etc should be ok). If the light comes on and stays on then some part is open circuit or ecu / modulator issue If the light goes out then comes on after pulling away then at least 1 of the ABS sensors is not returning the pulses in line with the others which points to sensor head / Reluctor ring on at least 1 wheel.... __________________ [SIGPIC][/SIGPIC]….All praise Bananaswan….