Quote:
Originally Posted by jim_k
Thanks. Can you still get limo rear inner waist seals? I thought they had run out too.
One trick I tried a while back was cutting and butting up two good sections salvaged from two partly corroded lengths. It took a bit of notching but looked okay.
Heddy, I like that fix. To be honest it looks hardly noticeable.
I have a similar fix. There are plastic strips just inside the sill and as you step in and out of the front seats these invariably get kicked and were forever falling off. Mine are now screwed in place and have never been a hassle since. Again it's hardly noticeable unless you went looking for it!
Cheers, I'll have a go at fixing tomorrow.
|
Parts 11 and 12
HERE
An alternative a member documented somewhere on the forum, was to use two plastic U shaped trims bonded together. The type you see covering the edge of exposed glass doors - another possible alternative would be a double channel type for sliding doors in a display cabinet. Something like this (
shop link). Obviously, this will rely on the card being screwed to the door, but it will prevent the dissimilar metal corrosion again.
or this