The 75 and ZT Owners Club Forums - View Single Post

The Mighty Quinn · 8th July 2019, 21:02

Thanks for the advice chaps

I've already done the inside of the rear subframe and the rear upper arms with Dynax S50; and treated the outside of the subframe to a good wire-wheeling, before Hydrate 80 and then a good coat of Bilt Hamber epoxy mastic.

Got the front subframe to do now and once everything is fitted, the entire (exposed areas) underside will get treated with Dynax UB.

Loads of work still to do

Cheers,
Karl.

8th July 2019, 21:02	#8
The Mighty Quinn Posted a thing or two 2004 mk1 Rover 75 1.8T Club SE saloon (auto) Join Date: Jul 2013 Location: Enniskillen Posts: 1,307 Thanks: 670 Thanked 254 Times in 222 Posts	Thanks for the advice chaps I've already done the inside of the rear subframe and the rear upper arms with Dynax S50; and treated the outside of the subframe to a good wire-wheeling, before Hydrate 80 and then a good coat of Bilt Hamber epoxy mastic. Got the front subframe to do now and once everything is fitted, the entire (exposed areas) underside will get treated with Dynax UB. Loads of work still to do Cheers, Karl.