Harry, Willy my heroes
cheers guys I didn't make that very clear did I.
Please excuse me I'm a virgin at this how to thing
I cut the wires, removed a bit of the sheath and twisted them together (same colour wire
)to maintain the circuit, the female spade connectors sipped on and then I crimped them tight. The reason they are both female is incase the LEDs were ever taken off, the spades wouldn't short or be put together.
Also if you ake the door card off you can unplug rather than remove the LEDs.
Hope that makes sense.
Apologies Poppy for not being very clear on that.
I'm glad your giving it a go
My best. Steve.