Quote:
Originally Posted by biffa75
A scotch lock! Connecting two wires together. A thin orange with green stripe wire (also found at the wiper stalk end) and a blue with green strip wire.
|
Blue with
green tracer (UG) runs between the BCU and the coil of wiper relay 2 (controlling slow or fast speed).
* Check that this is in place Rob as if it's not connected you won't get fast speed.
Blue with
light green tracer (ULG) is the fast speed supply from wiper relay 2 to the wiper motor.
Orange with green tracer (OG) is the supply to the rear wiper motor from the rear wiper relay contacts.
I can't find any record on the wiring diagram of OG being at the wiper stalk switch. Which pin is it on?
Simon