Quote:
Originally Posted by Arctic
Here you go Craig just like magic
Once you have sourced them fig 1
1
Window down then look behing the rubber channel fig 2
2
You will find three screws top middle and bottom fig 3/4/5
3
4
5
Once you have removed the three screws peel back the rubber fig 6/7
6
7
Then remove the panel like so below fitting is reverse fig 8
8
Job done i think these could be rubbed down and sprayed if not to bad may try it one day soon and post the out come cheers Arctic.
|
Hi Artic,
Any chance of republishing the invaluable images which would help me replace my door finishers.
Need all the help I can get!