[Rev Jules]

Originally Posted by Mickyboy

Hi Julian
In my professional experience this will probably help you
A basic guide below.

Easiest way to remove injectors without a puller is as follows
Start the engine and get it up to temp, once it’s up to temperature switch off allowed to cool down for five minutes or so and then spray plus gas around the injectors, leave to soak for 10 to 15 minutes then quickly dismantle everything, put a flat edge on the top of the Rocker cover a nice solid ruler shaped flat edge and then use a large flat headed screwdriver to gently prize them out after undoing the nuts either side of the injector.

I’ve removed hundreds this way, and it’s only very rare that you need a polo I do have a set of colours but don’t often use them
Mick

Hi Mick.
To late top part already stripped down,

Julien