The 75 and ZT Owners Club Forums - View Single Post

genpk · 22nd February 2018, 10:27

Got the car up on ramps today, had a look at the exhaust hangers, all seemed fine, plenty of clearance all around the heat shield , cross braces, rubbers looked fine etc.
Checked steering rack , all tight.
Think the only way I might be able to see what’s going on would be up on a hoist
and start the engine, foot on brake and shift from park to drive and have someone underneath.
Unfortunately I don’t have a hoist so unless the tiny noise gets worse probably not worth the effort !!
Only thing that has a bit of give in it is the flexible joint before the cat but looked fine.

22nd February 2018, 10:27	#7
genpk Posted a thing or two Rover 75 Saloon MGZT Join Date: Jul 2012 Location: Perth, AUSTRALIA Posts: 1,667 Thanks: 3 Thanked 461 Times in 299 Posts	Got the car up on ramps today, had a look at the exhaust hangers, all seemed fine, plenty of clearance all around the heat shield , cross braces, rubbers looked fine etc. Checked steering rack , all tight. Think the only way I might be able to see what’s going on would be up on a hoist and start the engine, foot on brake and shift from park to drive and have someone underneath. Unfortunately I don’t have a hoist so unless the tiny noise gets worse probably not worth the effort !! Only thing that has a bit of give in it is the flexible joint before the cat but looked fine. Last edited by genpk; 22nd February 2018 at 10:29..