Quote:
Originally Posted by Drakes
I have sneaked on here from a Land Rover forum as somebody suggested there is a wealth of knowledge on here.
I have 3 Webasto heaters all of which are unknown, 1 is from a BMW 7s, 1 from a Peugeot 807 and finally 1 from a 75. All appear similar and I have tried to use the diagnostic software on all 3 of them. The only on that responds is the BMW and I can read the spec and stored fault codes. The other 2 just hang on the "Initialisation" page. I have tried setting the device to W-Bus and also the Rover and Peugeot settings but no luck. The BMW one responds on the W-Bus so I know the software and OBDII are working fine.
The plan is to try and get a least one working and then fit it to the Land Rover.
Any help from somebody who can guide me with the software/diagnosis would be much appreciated.
Keith
|
As said above,fit the Rover one and forget the software ...
If the PCB is faulty,(see my diagnostics),i can help...
Mike