Quote:
Originally Posted by Mike Noc
You aren't getting the fuel burning heater supply hose mixed up with the outlet pipe to the UBP? 
The return pipe and fuel burning heater supply pipe are both situated in the offside tank module top and the outlet pipe to the UBP is on the nearside module top.
If you unplug the UBP then disconnect the outlet pipe on the nearside tank module and stick a smaller pipe in the connection and the other end in a jar, with key to position 2 you should get fuel flowing out if the ITP is working. |
All is explained,thanks Mike ,I wrongly assumed the outlet pipe was on the o/s and not the n/s.
