Go Back   The 75 and ZT Owners Club Forums > Search Forums
Register FAQ Image Gallery Members List Calendar Search Today's Posts Mark Forums Read
Notices

Showing results 1 to 150 of 356
Search took 0.05 seconds.
Search: Posts Made By: Rich in Vancouver
Forum: The 75 and ZT Owners Club General Forum 22nd February 2020, 22:18
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
I see your side of it, but living in a place with...

I see your side of it, but living in a place with absolutely NO 75/ZT parts available reading about the powerfold bits being scrapped made me feel a little bit ill. And, having just rebuilt a PG1...
Forum: The 75 and ZT Owners Club General Forum 17th February 2020, 20:17
Replies: 10
Views: 629
Posted By Rich in Vancouver
I would think the colour puts a lot of people...

I would think the colour puts a lot of people off.
Great for extroverts but for the rest of us...Not so much.
The rest of the spec looks great though.
Forum: The 75 and ZT Owners Club General Forum 16th February 2020, 02:15
Replies: 19
Views: 883
Posted By Rich in Vancouver
I've only had my ZT190 for 8 months but find...

I've only had my ZT190 for 8 months but find myself looking at V8s and ZT-Ts online.
Fortunately they are all very far away for me as I have no more room, money or spousal approval!:eek:
Forum: The 75 and ZT Owners Club General Forum 16th February 2020, 02:09
Replies: 10
Views: 521
Posted By Rich in Vancouver
Great idea but...That would mean I would have to...

Great idea but...That would mean I would have to buy and install a rear blind.
Another Project....Oh NOOoooooo!:eek:
Forum: The 75 and ZT Owners Club General Forum 15th February 2020, 18:01
Replies: 10
Views: 521
Posted By Rich in Vancouver
56 and retired...I'm envious! I am 63 and looking...

56 and retired...I'm envious! I am 63 and looking at retiring at the end of this year. I am hoping that deleting my daily 75km commute will mellow my driving a bit. It tends to be very cutthroat on...
Forum: The 75 and ZT Owners Club General Forum 15th February 2020, 02:14
Replies: 629
Views: 43,705
Posted By Rich in Vancouver
Not sure who Tesco buys their fuel from but over...

Not sure who Tesco buys their fuel from but over here the supermarket and independent fuel suppliers buy their fuel from the big refineries. Apparently it is the same fuel as the majors, just with a...
Forum: The 75 and ZT Owners Club General Forum 14th February 2020, 02:13
Replies: 8
Views: 634
Posted By Rich in Vancouver
The headlamps look very modern. I would think...

The headlamps look very modern. I would think that they put out a lot of light.
In spite of being a LHD ZT owner I wouldnt do the swap as it would cost me a fortune to get a replacement bumper and...
Forum: Technical Help Forum 13th February 2020, 03:25
Replies: 21
Views: 1,430
Posted By Rich in Vancouver
I agree that this is a great place for generous...

I agree that this is a great place for generous helpful folk. Trikey recently helped me out with some bits that just aren't available where I live.

There's nothing more frustrating than in...
Forum: The 75 and ZT Owners Club General Forum 13th February 2020, 02:51
Replies: 20
Views: 1,171
Posted By Rich in Vancouver
Yet another excuse to drive naked. :)

Yet another excuse to drive naked. :)
Forum: The 75 and ZT Owners Club General Forum 12th February 2020, 03:56
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Back in my teens I was driving my Dad's Chevy...

Back in my teens I was driving my Dad's Chevy Nova (The big American version) and T-boned a poor fellow in a Rambler American at an intersection.
The fact that those old American cars were so sturdy...
Forum: The 75 and ZT Owners Club General Forum 9th February 2020, 02:02
Replies: 8
Views: 467
Posted By Rich in Vancouver
Nice 75! I get nothing but compliments on the ZT...

Nice 75! I get nothing but compliments on the ZT from the people I work with.
I noticed the parking too.....Improper parking is a huge deal here. If you want a laugh check out a Facebook page local...
Forum: The 75 and ZT Owners Club General Forum 9th February 2020, 01:57
Replies: 629
Views: 43,705
Posted By Rich in Vancouver
Walked over to the ZT with the new throttle cable...

Walked over to the ZT with the new throttle cable in hand.
Took a good look at the routing and decided I really didn't want to open up the plenum and under-dash panel and spend a half hour on my...
Forum: Technical Help Forum 7th February 2020, 02:34
Replies: 3
Views: 230
Posted By Rich in Vancouver
I had mine done in September. I was surprised...

I had mine done in September. I was surprised just how light the
pedal was after. I didn't realise just how bad it was before, it took considerably more effort to depress the clutch.
I was a bit...
Forum: The 75 and ZT Owners Club General Forum 7th February 2020, 02:22
Replies: 25
Views: 885
Posted By Rich in Vancouver
Having done the job myself (only 3 times mind...

Having done the job myself (only 3 times mind you) I am amazed by Lates 2 hour time. I think it was him I was in a discussion with on Facebook and really didn't believe it. (It takes me a weekend!)...
Forum: The 75 and ZT Owners Club General Forum 5th February 2020, 02:31
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Gotta love those electronic gremlins. I filled...

Gotta love those electronic gremlins.
I filled up with petrol yesterday morning and the guage stayed at 1/4 full where it was before. It stayed there this morning for the drive to work but decided...
Forum: The 75 and ZT Owners Club General Forum 30th January 2020, 03:41
Replies: 15
Views: 1,273
Posted By Rich in Vancouver
I get bored of the conversation as well. The...

I get bored of the conversation as well.
The first MG's were modified Morrises so I had no issues with the provenance of my 1955 ZA, or my 2002 ZT.

They were made in Britain though.

I...
Forum: The 75 and ZT Owners Club General Forum 28th January 2020, 14:28
Replies: 17
Views: 975
Posted By Rich in Vancouver
I have done bits like an MGF hardtop, mirrors and...

I have done bits like an MGF hardtop, mirrors and splitters using a base coat/clear coat rattle can system and the smaller bits turned out great.
It was tough getting a good finish on the large area...
Forum: The 75 and ZT Owners Club General Forum 28th January 2020, 05:13
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
My ZT has been taunting me. For the past few...

My ZT has been taunting me.
For the past few weeks I have been getting a bulb failure warning. Not for the burned out fog light which has been reliably burned out for a month, but every week or so...
Forum: Technical Help Forum 27th January 2020, 05:07
Replies: 1
Views: 191
Posted By Rich in Vancouver
Good plan. I usually keep a piece of old hose...

Good plan. I usually keep a piece of old hose around in case I need to do the same.
Forum: The 75 and ZT Owners Club General Forum 27th January 2020, 04:34
Replies: 629
Views: 43,705
Posted By Rich in Vancouver
As a matter of fact McLaren also call their...

As a matter of fact McLaren also call their orange "Volcano Orange" As you would expect it is much deeper, and richer than the MGF Volcano. They must budget a bit more per car for paint.
One...
Forum: The 75 and ZT Owners Club General Forum 26th January 2020, 19:09
Replies: 22
Views: 1,153
Posted By Rich in Vancouver
Some good advice there on both sides of the coin....

Some good advice there on both sides of the coin.
I agree that you should make up your own mind (Says the 63 year old whippersnapper!)
My dear old departed Dad drove a massive Chrysler LeBaron...
Forum: The 75 and ZT Owners Club General Forum 26th January 2020, 18:57
Replies: 629
Views: 43,705
Posted By Rich in Vancouver
What a bunch of poorly old geezers! FWIW I had...

What a bunch of poorly old geezers!
FWIW I had a bout of acid reflux the other day as well...Thought I was having a coronary.:eek: The government recently banned Zantac which works a treat for me so...
Forum: Technical Help Forum 26th January 2020, 01:49
Replies: 6
Views: 308
Posted By Rich in Vancouver
It's probably just a CYA liability thing. I've...

It's probably just a CYA liability thing.
I've certainly never done it.
Forum: The 75 and ZT Owners Club General Forum 26th January 2020, 01:37
Replies: 629
Views: 43,705
Posted By Rich in Vancouver
Today I took my MGF down off the stands for the...

Today I took my MGF down off the stands for the first time in many months after rebuilding the gearbox and fitting a new clutch.
It fired up first time and I took it for a run up the street, and to...
Forum: The 75 & ZT Gallery 25th January 2020, 06:29
Replies: 549
Views: 180,119
Posted By Rich in Vancouver
Good spot guys. The reflectors are a...

Good spot guys.
The reflectors are a requirement for imported cars to pass our Provincial safety test (There are red ones on the rear as well) I really do have to take the heat gun to them and get...
Forum: Technical Help Forum 24th January 2020, 04:37
Replies: 19
Views: 772
Posted By Rich in Vancouver
Mine grumbles when the A/C is engaged. It seems...

Mine grumbles when the A/C is engaged.
It seems to be coming from the clutch on the compressor,
but the A/C works well so I am ignoring it for now.

Question...Do you have to remove the bumper...
Forum: The 75 and ZT Owners Club General Forum 20th January 2020, 23:17
Replies: 14
Views: 633
Posted By Rich in Vancouver
John, Glad to hear you are keeping your sense of...

John, Glad to hear you are keeping your sense of humour...you must have a good supply of Screech to keep your wife warm on the tractor! :)
Forum: The 75 and ZT Owners Club General Forum 20th January 2020, 04:23
Replies: 14
Views: 633
Posted By Rich in Vancouver
Last week at the other end of Canada we had 20cm...

Last week at the other end of Canada we had 20cm of snow over 3 days. It was -5C for a couple of days but today at +8c the rain came and washed it all away. :shrug:
John, were you in Newfoundland...
Forum: Technical Help Forum 19th January 2020, 18:39
Replies: 5
Views: 392
Posted By Rich in Vancouver
Cybox exhausts?

Cybox exhausts?
Forum: Technical Help Forum 19th January 2020, 01:28
Replies: 7
Views: 368
Posted By Rich in Vancouver
I have Pittasoft dash cams on all of our cars. ...

I have Pittasoft dash cams on all of our cars.
I use a cig lighter socket wired to the fuse box using a piggy-back fuse and just tuck the cable behind the A pillar trim. Quick to install and even...
Forum: The 75 and ZT Owners Club General Forum 19th January 2020, 01:20
Replies: 56
Views: 2,746
Posted By Rich in Vancouver
I had a Chevy Cruise with automatic lights. I go...

I had a Chevy Cruise with automatic lights. I go through a 1km long tunnel on my commute and the lights wouldn't come on until I was 1/2 way through-Annoying!
I second the comment on cup holders!...
Forum: The 75 and ZT Owners Club General Forum 18th January 2020, 20:36
Replies: 12
Views: 1,104
Posted By Rich in Vancouver
I'm glad i'm not the only one who forgets it!...

I'm glad i'm not the only one who forgets it! :duh:
Forum: Technical Help Forum 18th January 2020, 20:27
Replies: 10
Views: 688
Posted By Rich in Vancouver
Good information Brian. I have the same issue...

Good information Brian.
I have the same issue and it also annoys me every time I start the car (Along with the SRS light which I also have to get around to sorting!)
My service indicator is now at...
Forum: The 75 & ZT Gallery 18th January 2020, 07:04
Replies: 549
Views: 180,119
Posted By Rich in Vancouver
Today is the 18th Anniversary of my ZT190 "Andy"...

Today is the 18th Anniversary of my ZT190 "Andy" rolling off the line at Longbridge.
A couple of days ago the odo rolled over 125,000km so there's lots of life in him yet. :clap:

Here's a snow...
Forum: The 75 and ZT Owners Club General Forum 17th January 2020, 04:45
Replies: 11
Views: 569
Posted By Rich in Vancouver
Not that brave mate!:bowdown: I like my...

Not that brave mate!:bowdown:

I like my daylight.
Forum: The 75 and ZT Owners Club General Forum 17th January 2020, 00:36
Replies: 11
Views: 569
Posted By Rich in Vancouver
You can tell I was in the Infantry-bitter and...

You can tell I was in the Infantry-bitter and jealous!:D

Tri-flow is also American made. It's an excellent lubricant that leaves a bit of teflon behind once the solvent component evaporates.
...
Forum: The 75 and ZT Owners Club General Forum 16th January 2020, 17:49
Replies: 11
Views: 569
Posted By Rich in Vancouver
Thanks for the info! Normally I would say that...

Thanks for the info!
Normally I would say that the weather here doesn't get very cold, but in the last few days it has dipped to well below zero C. for the first time in two years.
Things should be...
Forum: Technical Help Forum 15th January 2020, 00:27
Replies: 19
Views: 880
Posted By Rich in Vancouver
A friend imported an MG from Germany and found a...

A friend imported an MG from Germany and found a mysterious electronic device installed. He had the label translated and found it was a "Marder Repeller", a Marder being a type of weasel which...
Forum: The 75 and ZT Owners Club General Forum 15th January 2020, 00:18
Replies: 11
Views: 569
Posted By Rich in Vancouver
Sticking Throttle

My ZT190 5-speed manual has been running very well mechanically.
I have had a couple of episodes of the throttle sticking on. After getting up to speed, 4000-ish RPM and going to shift to the next...
Forum: Technical Help Forum 14th January 2020, 03:53
Replies: 8
Views: 373
Posted By Rich in Vancouver
http://www.fototime.com/28275D3CD437E1C/standard.j...

http://www.fototime.com/28275D3CD437E1C/standard.jpg
Forum: The 75 and ZT Owners Club General Forum 13th January 2020, 03:36
Replies: 14
Views: 957
Posted By Rich in Vancouver
That was a good price! A bit far for me to pick...

That was a good price!
A bit far for me to pick it up though. :}
Forum: The 75 and ZT Owners Club General Forum 12th January 2020, 23:28
Replies: 14
Views: 957
Posted By Rich in Vancouver
I take it that it was a T4. (The link was gone by...

I take it that it was a T4. (The link was gone by the time I clicked on it)
Out of curiosity what was the starting bid/Buy it now?
Forum: Technical Help Forum 12th January 2020, 18:08
Replies: 8
Views: 373
Posted By Rich in Vancouver
I have been getting an intermittent warning for...

I have been getting an intermittent warning for the front left sidelight.
I took a look and it seems that you need to remove the V6 air filter box to get at the bulb easily. I have decided that I...
Forum: Technical Help Forum 10th January 2020, 03:47
Replies: 10
Views: 625
Posted By Rich in Vancouver
I work as a locksmith (dont do cars though) and...

I work as a locksmith (dont do cars though) and im not a big fan of WD40.
Its mostly solvent and leaves very little behind in the way of lubrication. It is very good for cleaning parts though.
I...
Forum: Technical Help Forum 10th January 2020, 03:37
Replies: 76
Views: 4,538
Posted By Rich in Vancouver
My new arms only have a slot on the left hand one...

My new arms only have a slot on the left hand one and my headlamp adjuster is on the right hand side. Its a Left Hand drive so I dont know if that makes a difference.
As for a pit, I don't have one...
Forum: Technical Help Forum 10th January 2020, 03:28
Replies: 10
Views: 538
Posted By Rich in Vancouver
I have a K&N panel filter in my 190 and am happy...

I have a K&N panel filter in my 190 and am happy with it.
It's hard to say if a cone filter would be much better as it picks up it's air from the hot engine compartment where the stock filter...
Forum: Technical Help Forum 9th January 2020, 04:00
Replies: 18
Views: 1,021
Posted By Rich in Vancouver
I was lazy and ran my ZT through the car wash...

I was lazy and ran my ZT through the car wash before taking it to a funeral a few weeks ago.
The next day I got a failed bulb warning light. The bulb was fine and the light went away.
The next day...
Forum: Technical Help Forum 9th January 2020, 03:49
Replies: 10
Views: 599
Posted By Rich in Vancouver
I bought a set 6 months ago only to find I got...

I bought a set 6 months ago only to find I got one too many small bolts and one too few of the large. :duh:
Rimmers was good enough to ship me a complete replacement set free of charge(Although it...
Forum: Technical Help Forum 8th January 2020, 03:54
Replies: 76
Views: 4,538
Posted By Rich in Vancouver
I still haven't gotten around to fitting the arms...

I still haven't gotten around to fitting the arms and bushings I bought from DMGRS months ago as I have been sidetracked rebuilding the gearbox on my MGF. It's on it's way back into the car now so I...
Forum: Technical Help Forum 5th January 2020, 04:10
Replies: 5
Views: 345
Posted By Rich in Vancouver
Now that was interesting! I got the box...

Now that was interesting!
I got the box together and for the life of me couldn't get the circlip to locate in it's groove. I had put the new gearsets together using parts from two gearboxes (one Mpi...
Forum: The 75 and ZT Owners Club General Forum 5th January 2020, 03:01
Replies: 19
Views: 1,400
Posted By Rich in Vancouver
Here in Canada we got quite a few Marinas in the...

Here in Canada we got quite a few Marinas in the mid-70s.
Mostly sedans with a percentage of coupes and very few estates. We never
got the vans or pick-ups. There are very few left here although I...
Forum: Technical Help Forum 4th January 2020, 01:38
Replies: 32
Views: 1,461
Posted By Rich in Vancouver
Correct assumption! My ZT is the same. If the...

Correct assumption! My ZT is the same.
If the plug is a very nicely made BMW item that is exactly what it is for.
My car is also missing the cruise control so I have another mystery plug
to the...
Forum: Technical Help Forum 3rd January 2020, 17:31
Replies: 22
Views: 833
Posted By Rich in Vancouver
Interesting thread! I don't have the issue but...

Interesting thread!
I don't have the issue but for future reference does anyone have any idea how the point where the O-ring issue was corrected at the factory correlates to ZT VIN numbers?
I know...
Forum: The 75 and ZT Owners Club General Forum 1st January 2020, 18:40
Replies: 6
Views: 700
Posted By Rich in Vancouver
That would be an ideal car for export. ...

That would be an ideal car for export.
Particularly as it's located in Portsmouth.
The only catch is Canada requires a car to be 15 years old from date of manufacture so depending on the date it...
Forum: The 75 & ZT Gallery 1st January 2020, 02:45
Replies: 5
Views: 417
Posted By Rich in Vancouver
Oooooh, very nice. Nice colour too! :envy:

Oooooh, very nice. Nice colour too! :envy:
Forum: The 75 and ZT Owners Club General Forum 1st January 2020, 02:01
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
If you have a spare Trikey I would appreciate...

If you have a spare Trikey I would appreciate it!.
I will send you a PM.
Forum: Technical Help Forum 31st December 2019, 23:46
Replies: 2
Views: 256
Posted By Rich in Vancouver
I had a catch tank on my V6 Freelander. It...

I had a catch tank on my V6 Freelander. It collected a disgusting mixture of oil and condensate but the catch was that you would have to check it often.
If it fills up to the level of the pipes the...
Forum: The 75 and ZT Owners Club General Forum 31st December 2019, 23:40
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Now I'm annoyed that my old fitting was thrown...

Now I'm annoyed that my old fitting was thrown out with the slave cylinder when the clutch was done. :mad:
Forum: Technical Help Forum 31st December 2019, 18:11
Replies: 5
Views: 345
Posted By Rich in Vancouver
Thanks all! Kaiser, thats the same page as in...

Thanks all!
Kaiser, thats the same page as in my MGF manual which for some reason doesnt show those bolts (although they show torque values for bolts that you would never bother using a torque...
Forum: The 75 and ZT Owners Club General Forum 31st December 2019, 04:20
Replies: 26
Views: 1,441
Posted By Rich in Vancouver
I got a Milwaukee brand tyre inflator that uses...

I got a Milwaukee brand tyre inflator that uses the same rechargeable batteries as my battery ratchet and drill. It's a cool little device, you punch in the pressure you need and it pumps the tyre up...
Forum: Technical Help Forum 31st December 2019, 01:40
Replies: 5
Views: 345
Posted By Rich in Vancouver
Torque setting for PG1 gearbox

This is a bit off topic as it's for my MGF's PG1 gearbox but I have looked everywhere (MGF shop manual, Freelander shop manual, various online forums and articles) and I can't find one specific...
Forum: The 75 and ZT Owners Club General Forum 30th December 2019, 19:32
Replies: 23
Views: 1,536
Posted By Rich in Vancouver
You don't necessarily have to remove the doors...

You don't necessarily have to remove the doors for a colour change but there is a lot of time involved removing and replacing weatherstrip, door cards and fittings and cleaning out all of the nooks...
Forum: The 75 and ZT Owners Club General Forum 28th December 2019, 02:28
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Finally got around to working on the PG1 gearbox...

Finally got around to working on the PG1 gearbox for the MGF.
I got the intake and output shafts assembled with new bearings but
ran into a snag when I couldn't get the retaining nut on the input...
Forum: Technical Help Forum 23rd December 2019, 03:59
Replies: 15
Views: 1,497
Posted By Rich in Vancouver
That's correct Vitesse. The weather here is the...

That's correct Vitesse. The weather here is the most mild in Canada. I am in the very south-west portion of the province, only a hill away from being in sight of the Pacific. (Technically the Salish...
Forum: Technical Help Forum 22nd December 2019, 07:22
Replies: 15
Views: 1,497
Posted By Rich in Vancouver
When I did the belts, both on my 190 and my...

When I did the belts, both on my 190 and my pervious Freelander I knocked the caps off with a hammer and screwdriver. I found the new caps impossible to fit (More trouble than my motivation allowed...
Forum: Technical Help Forum 22nd December 2019, 07:04
Replies: 2
Views: 455
Posted By Rich in Vancouver
I'm glad my day wasn't as interesting as yours! ...

I'm glad my day wasn't as interesting as yours!

Thanks for sharing.:icon_lol:
Forum: Technical Help Forum 21st December 2019, 18:30
Replies: 2
Views: 270
Posted By Rich in Vancouver
Last time I did the belts on my KV6 I forgot to...

Last time I did the belts on my KV6 I forgot to put the dipstick tube back in. I tried to worm the tube back into place but wasnt quite able to do it without removing the aux. belt idler. Then it was...
Forum: The 75 and ZT Owners Club General Forum 21st December 2019, 18:00
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Running EBC grooved and dimpled rotors with red...

Running EBC grooved and dimpled rotors with red stuff pads on my 190. I am happy with their performance.
I happened to have a can of silver VHT paint on hand so thats what the calipers got. :)
The...
Forum: The 75 and ZT Owners Club General Forum 17th December 2019, 02:57
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
I normally avoid automated car washes but with a...

I normally avoid automated car washes but with a funeral to go to on Saturday and no time to get my ZT looking respectable I took it through the local car wash.
I was a bit alarmed by the amount of...
Forum: The 75 & ZT Gallery 15th December 2019, 18:08
Replies: 549
Views: 180,119
Posted By Rich in Vancouver
Paying a visit to Wile-E-Coyote ...

Paying a visit to Wile-E-Coyote

http://www.fototime.com/ACFE321C34AF2AD/standard.jpg
Forum: The 75 and ZT Owners Club General Forum 15th December 2019, 02:29
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
I use a T55 or T50 socket with a ratcheting...

I use a T55 or T50 socket with a ratcheting spanner slid over the shank to turn it.
Fits in that narrow space between the pulley and inner wing and works like a charm!...
Forum: The 75 and ZT Owners Club General Forum 14th December 2019, 06:20
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
I bought a 1975 TR7 with a nice set of Pirellis...

I bought a 1975 TR7 with a nice set of Pirellis on it. Loads of tread but it was really easy to break the rear end loose. It made it feel like it had a lot of power. :D
I checked the date code and...
Forum: The 75 and ZT Owners Club General Forum 13th December 2019, 04:07
Replies: 34
Views: 2,032
Posted By Rich in Vancouver
I live several thousand miles from the nearest ZT...

I live several thousand miles from the nearest ZT parts supplier.
I am in the position where airfreight customs duty etc. often cost as much as the parts I buy so I try to be a careful shopper and...
Forum: The 75 and ZT Owners Club General Forum 12th December 2019, 03:58
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Found I had a burnt out fog light this morning. ...

Found I had a burnt out fog light this morning.
That will be a job for the weekend.
Is the bulb accessible from the front or is this an undertray and/or bumper off job on my pre-facelift ZT?
Forum: Technical Help Forum 9th December 2019, 00:24
Replies: 3
Views: 359
Posted By Rich in Vancouver
Cybox makes a stainless cat back system that they...

Cybox makes a stainless cat back system that they say fits all variants except the 260
Rick-Sta recently posted a video of his and it sounds very nice!
Forum: The 75 and ZT Owners Club General Forum 7th December 2019, 04:26
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
I picked up a set of Viton rings off E-bay...

I picked up a set of Viton rings off E-bay recently and the kit contained two different sizes that had to be installed in the right position. It also came with a flat seal that went on the cap first....
Forum: The 75 and ZT Owners Club General Forum 6th December 2019, 04:33
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
I prefer to listen to the oddball Christmas stuff...

I prefer to listen to the oddball Christmas stuff like The Pogues' Fairytale of New York, Tom Waits Christmas Card from a Hooker in Minneapolis, or The Killers' Don't Shoot Me Santa Claus.
Of...
Forum: The 75 and ZT Owners Club General Forum 6th December 2019, 04:29
Replies: 13
Views: 959
Posted By Rich in Vancouver
You just need to find a scrapper Tesla. And...

You just need to find a scrapper Tesla.

And about 1000 hours to do the conversion!
Forum: The 75 and ZT Owners Club General Forum 4th December 2019, 02:58
Replies: 22
Views: 1,598
Posted By Rich in Vancouver
Don't forget to order new bolts for the cam...

Don't forget to order new bolts for the cam pulleys, and it's not a bad idea to lay on a set of cam seals. They are not expensive and it would be annoying to find a leaking seal and have to wait for...
Forum: Technical Help Forum 1st December 2019, 02:13
Replies: 5
Views: 393
Posted By Rich in Vancouver
There is a drain in the V that lets water out in...

There is a drain in the V that lets water out in that area so hopefully that is it rather than the water pump. :eek:
My money is on the drain. :}
Forum: The 75 and ZT Owners Club General Forum 26th November 2019, 05:47
Replies: 10
Views: 1,305
Posted By Rich in Vancouver
The leftover shells were bought by William Riley...

The leftover shells were bought by William Riley but his plans to put the car back into production didn't work out, and they were sold on E-Bay 4 or 5 years ago. A friend of mine here in Canada has...
Forum: The 75 and ZT Owners Club General Forum 26th November 2019, 05:39
Replies: 16
Views: 729
Posted By Rich in Vancouver
I find that head torches never seem to illuminate...

I find that head torches never seem to illuminate what I want.
I have a small LED torch that I generally hold in my mouth.
Not only does it make aiming the light easier it cuts down on the swearing!
Forum: The 75 and ZT Owners Club General Forum 23rd November 2019, 19:09
Replies: 39
Views: 2,492
Posted By Rich in Vancouver
I knew that Brian! :D It's the resemblance...

I knew that Brian! :D
It's the resemblance between Andy and my Step-Dad that is the connection. Mainly the Schnozz!
Both Dad and Andy's illustrator shared the name Reg and I have that as part of...
Forum: The 75 and ZT Owners Club General Forum 23rd November 2019, 04:55
Replies: 39
Views: 2,492
Posted By Rich in Vancouver
LOL! My Andy Capp tat is in memorium of my old...

LOL! My Andy Capp tat is in memorium of my old scouser stepdad.
Andy is a dead ringer for him although Dad wasn't a drinker, womaniser or souse. :)
The Andy radiator mascot was mounted on my old...
Forum: The 75 and ZT Owners Club General Forum 22nd November 2019, 04:09
Replies: 39
Views: 2,492
Posted By Rich in Vancouver
I bought my ZT190 in July and it has been my...

I bought my ZT190 in July and it has been my daily ever since doing 75km a day. I wouldn't call it a hack as I love the car and it's just going to keep getting better.
It's one of the few cars I...
Forum: Technical Help Forum 21st November 2019, 04:36
Replies: 8
Views: 581
Posted By Rich in Vancouver
If it fell off I would bet that someone didn't...

If it fell off I would bet that someone didn't put the scrivets back in when they had it off last. As mentioned above there are quite a few of them and they grip really well.
Rimmers web site will...
Forum: Technical Help Forum 16th November 2019, 19:41
Replies: 14
Views: 686
Posted By Rich in Vancouver
Tighten it till it shears off then back off 1/4...

Tighten it till it shears off then back off 1/4 turn! :duh:
Forum: The 75 and ZT Owners Club General Forum 16th November 2019, 04:38
Replies: 2
Views: 435
Posted By Rich in Vancouver
That would make me the third point in the...

That would make me the third point in the overseas triangle!
I have also had some success using TOAF although I have been taking small careful steps using it. I just couldn't justify spending...
Forum: Technical Help Forum 15th November 2019, 02:56
Replies: 14
Views: 686
Posted By Rich in Vancouver
I agree with Colvert. For smaller fasteners...

I agree with Colvert. For smaller fasteners "Snug" is good.
When I worked in the trade back in the ol' days of the 70's and 80's
we generally only used torque wrenches for parts that required even...
Forum: The 75 and ZT Owners Club General Forum 15th November 2019, 02:46
Replies: 20
Views: 1,241
Posted By Rich in Vancouver
Mine only happens with the A/C on and is quite...

Mine only happens with the A/C on and is quite noticeable. The idler was replaced in September when I did the timing belts along with the timing belt idler, tensioner pulley and water pump.(so it...
Forum: The 75 and ZT Owners Club General Forum 14th November 2019, 05:04
Replies: 6
Views: 707
Posted By Rich in Vancouver
I already have my subscribed copy here at the end...

I already have my subscribed copy here at the end of the world in Canada.
I have to agree...A great article on Rick's car! :bowdown:
Forum: The 75 and ZT Owners Club General Forum 14th November 2019, 04:54
Replies: 20
Views: 1,241
Posted By Rich in Vancouver
I have a similar noise on my V6 and have narrowed...

I have a similar noise on my V6 and have narrowed it down to the compressor. Everything has been replaced except the A/C compressor so that will be next if it gets any worse.
One question...On a ZT...
Forum: The 75 and ZT Owners Club General Forum 12th November 2019, 02:35
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
On our way to the Armistice Day ceremony today I...

On our way to the Armistice Day ceremony today I stopped to take a picture of the ZT by my favorite sign.

Waiting for the Anvil to Fall!

http://www.fototime.com/ACFE321C34AF2AD/standard.jpg
Forum: The 75 and ZT Owners Club General Forum 10th November 2019, 20:04
Replies: 629
Views: 43,705
Posted By Rich in Vancouver
There's not much to be done on the ZT (Fingers...

There's not much to be done on the ZT (Fingers crossed, knocking on wood!) so I made progress yesterday stripping the MGF down to remove the gearbox.
Axles off, exhaust off, starter motor off,...
Forum: Technical Help Forum 9th November 2019, 02:39
Replies: 13
Views: 972
Posted By Rich in Vancouver
In my Hippos defence it was doing a 75km commute...

In my Hippos defence it was doing a 75km commute daily and ran very well.
The only reason I no longer have it is because I swapped it for my ZT190.
The new owner, a multiple 75 owner is very happy...
Forum: Technical Help Forum 8th November 2019, 04:18
Replies: 13
Views: 972
Posted By Rich in Vancouver
I fit an oil catch tank on my V6 Freelander. It...

I fit an oil catch tank on my V6 Freelander. It certainly collected fluid but the manifold still got oily. I found if I forget to empty the tank every couple of weeks, and it overfilled the car would...
Forum: The 75 and ZT Owners Club General Forum 5th November 2019, 02:34
Replies: 6
Views: 443
Posted By Rich in Vancouver
I have only ever been to one auction. I came...

I have only ever been to one auction.
I came home with a 400kg antique safe (as in a vault)
that I didn't need. I had to rent a truck with a lift gate to
get it home and couldn't get it through...
Forum: Technical Help Forum 4th November 2019, 05:13
Replies: 31
Views: 1,477
Posted By Rich in Vancouver
Nearside and offside also make no sense to me as...

Nearside and offside also make no sense to me as it's not a term used in North America. It gets particularly abstract when used interchangeably with driver/passenger as my ZT is a LHD model. When I...
Forum: The 75 and ZT Owners Club General Forum 2nd November 2019, 23:04
Replies: 16
Views: 1,126
Posted By Rich in Vancouver
I generally use the econ button as my A/C...

I generally use the econ button as my A/C compressor is noisy and I would rather not have to change it until absolutely necessary.
(I take it changing the compressor on a 190 is bumper off and rad...
Forum: The 75 and ZT Owners Club General Forum 2nd November 2019, 03:07
Replies: 64
Views: 2,894
Posted By Rich in Vancouver
Try clenching your cheeks to prevent gravel...

Try clenching your cheeks to prevent gravel ingress. :getmecoat:
Forum: The 75 and ZT Owners Club General Forum 1st November 2019, 04:24
Replies: 64
Views: 2,894
Posted By Rich in Vancouver
I turn 63 in a couple of weeks and have some of...

I turn 63 in a couple of weeks and have some of the ailments the others mentioned; Arthritis, bad knees, bad back and I have had a pacemaker since 2002. A couple of years ago I was upgraded to an...
Forum: The 75 and ZT Owners Club General Forum 31st October 2019, 01:49
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
I have EBC rotors with Redstuff pads on my 190....

I have EBC rotors with Redstuff pads on my 190. Very happy with their performance. The price, not so much :eek:
Forum: Technical Help Forum 26th October 2019, 01:40
Replies: 14
Views: 1,164
Posted By Rich in Vancouver
The F badge is considerably smaller with only 4...

The F badge is considerably smaller with only 4 prongs and I was able to pop it off from the front. The MGF badge and variations are readily available but I haven't seen any replacements for the ZT....
Forum: The 75 and ZT Owners Club General Forum 26th October 2019, 01:27
Replies: 9
Views: 658
Posted By Rich in Vancouver
If they happen to have ant dealer stickers I...

If they happen to have ant dealer stickers I would love to get my hands on one!
Forum: Technical Help Forum 25th October 2019, 01:30
Replies: 14
Views: 1,164
Posted By Rich in Vancouver
It looks glued on to me. Mind you I was surprised...

It looks glued on to me. Mind you I was surprised to find the badge on my MGF was metal and held on with prongs into the cover.
I am hoping to find a replacement for the discoloured badge on my ZT...
Forum: The 75 and ZT Owners Club General Forum 24th October 2019, 02:10
Replies: 9
Views: 658
Posted By Rich in Vancouver
Thanks for the leads guys! As far as I know my...

Thanks for the leads guys!
As far as I know my ZT is the only one west of Toronto which is 4300km east of here (And that one is owned by a fellow from Newfoundland!)

I will check out the Belgian...
Forum: Technical Help Forum 23rd October 2019, 02:09
Replies: 4
Views: 540
Posted By Rich in Vancouver
I had good luck finding proper headlining...

I had good luck finding proper headlining material on E-Bay.
Mind you, I am on the opposite side of the pond.
Forum: The 75 and ZT Owners Club General Forum 23rd October 2019, 02:03
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Invested in a pair of nice Pirelli ice and snow...

Invested in a pair of nice Pirelli ice and snow tyres yesterday.
The tyre shop tried to sell me a set of 4 but at over $1000.cdn
there was no way. I'll have to make do with the snows on the driven...
Forum: The 75 and ZT Owners Club General Forum 23rd October 2019, 01:53
Replies: 9
Views: 658
Posted By Rich in Vancouver
Belgian MGR Dealers?

My ZT190 was sold new to Belgium in 2002 but there is no record of the dealership it went to.
Being the curious type I am wondering if anyone knows the names of any Belgian MGR dealers from back in...
Forum: Technical Help Forum 22nd October 2019, 04:25
Replies: 3
Views: 273
Posted By Rich in Vancouver
I agree, the time it takes to remove the battery...

I agree, the time it takes to remove the battery and the intake plenum is time well spent. The right rear belt is enough of a reach when it's out in the open never mind being hidden behind the...
Forum: Technical Help Forum 21st October 2019, 01:25
Replies: 16
Views: 905
Posted By Rich in Vancouver
I find the Trip Computer on my ZT190 is also...

I find the Trip Computer on my ZT190 is also about 10% optimistic compared to calculating consumption over several tanks.
The manual ZTs mileage is about 25% better than my previous V6 Freelander...
Forum: Technical Help Forum 17th October 2019, 01:45
Replies: 13
Views: 972
Posted By Rich in Vancouver
I should have mentioned that the manifold that I...

I should have mentioned that the manifold that I opened up and sealed back up doesn't work worth a darn. I'm not sure if it was my fault or not but there is too much drag on the valve operating rod....
Forum: Technical Help Forum 17th October 2019, 01:38
Replies: 7
Views: 283
Posted By Rich in Vancouver
The new version of the sensor has a specific link...

The new version of the sensor has a specific link lead so both parts are needed.
A couple of years ago I bought a replacement sensor and link lead and the link lead turned out to be DOA.
That was...
Forum: Technical Help Forum 15th October 2019, 01:34
Replies: 3
Views: 265
Posted By Rich in Vancouver
I don't know if the job will change the oil...

I don't know if the job will change the oil consumption but it certainly won't hurt! I assume you will be changing or cleaning the wire mesh filters in the cam covers?
I have had very good success...
Forum: Technical Help Forum 15th October 2019, 01:26
Replies: 12
Views: 506
Posted By Rich in Vancouver
"Cobalt" It is the bit of choice for titanium and...

"Cobalt" It is the bit of choice for titanium and hardened steels. A lubricant is a must to keep the temp down in order to prevent bit breakage and extend bit life. (The work should not be glowing...
Forum: Technical Help Forum 15th October 2019, 01:16
Replies: 13
Views: 972
Posted By Rich in Vancouver
The problem with dismantling is you basically...

The problem with dismantling is you basically have to chisel the lid off of it with potential for damage (I have done it and it's a chore) and then glue it back on.
You may be best to just dump a...
Forum: Technical Help Forum 14th October 2019, 17:02
Replies: 12
Views: 506
Posted By Rich in Vancouver
Something I learned in the aircraft industry is...

Something I learned in the aircraft industry is there is nothing worse than cheap drill bits. They break, and go dull quickly and can lead to frustration damage and even injury trying to make them do...
Forum: The 75 and ZT Owners Club General Forum 14th October 2019, 16:45
Replies: 18
Views: 1,452
Posted By Rich in Vancouver
Depends on the body condition doesn't it. You...

Depends on the body condition doesn't it.
You can always fix any mechanical issues but if it happens
to be rust free it has the potential of being a decent car.
An hour with a blow dryer would get...
Forum: Technical Help Forum 14th October 2019, 06:06
Replies: 11
Views: 771
Posted By Rich in Vancouver
When I painted my calipers I brushed them off...

When I painted my calipers I brushed them off with a stiff wire brush and wiped them down with thinners.
I had a spray can of silver VHT paint on hand so I masked off what I didn't want paint on and...
Forum: The 75 and ZT Owners Club General Forum 13th October 2019, 05:49
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
It's always nice to get a break, even a little...

It's always nice to get a break, even a little one. :sunny:
Forum: The 75 and ZT Owners Club General Forum 12th October 2019, 23:25
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
I was able to fit one of those E-bay Chinese fob...

I was able to fit one of those E-bay Chinese fob cases to my existing key blade.
It was quite close but required a bit of dremelling on the blade to make it fit.
Forum: The 75 and ZT Owners Club General Forum 12th October 2019, 22:27
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Scared the living daylights out of myself. ...

Scared the living daylights out of myself.
Three weeks ago I did the timing belts on my 190. Two weeks ago
I had it apart again to fix an error I made on the belt tensioner.
Thursday I had it on...
Forum: The 75 and ZT Owners Club General Forum 12th October 2019, 18:11
Replies: 17
Views: 1,118
Posted By Rich in Vancouver
It's frustrating as it's a simple part and it...

It's frustrating as it's a simple part and it should be no big deal to manufacture one that lasts. A small manufacturer would be able to make a durable drop link in small quantities to at least...
Forum: The 75 and ZT Owners Club General Forum 12th October 2019, 16:49
Replies: 17
Views: 1,118
Posted By Rich in Vancouver
It's a common problem. There are companies that...

It's a common problem.
There are companies that make beautifully machined versions to upgrade the MGF drop links.
Forum: The 75 and ZT Owners Club General Forum 12th October 2019, 16:46
Replies: 12
Views: 1,040
Posted By Rich in Vancouver
A forgotten skill from olden days! Much like...

A forgotten skill from olden days! Much like changing TV channels without a remote!:shrug:
Forum: Technical Help Forum 10th October 2019, 01:52
Replies: 4
Views: 324
Posted By Rich in Vancouver
Ravenol also makes an MTF94 rated oil. A lot...

Ravenol also makes an MTF94 rated oil.
A lot of the MGF guys use Honda MTF with good results.
Forum: The 75 and ZT Owners Club General Forum 10th October 2019, 01:46
Replies: 20
Views: 1,145
Posted By Rich in Vancouver
The release bearing on my ZT190 was making...

The release bearing on my ZT190 was making ominous noises
After changing the clutch I was amazed how much lighter the pedal was.
It took a bit of getting used to! I hadnt realised how heavy the...
Forum: The 75 and ZT Owners Club General Forum 8th October 2019, 01:35
Replies: 13
Views: 1,142
Posted By Rich in Vancouver
I retrimmed the hardtop on my MGF using foam...

I retrimmed the hardtop on my MGF using foam backed headliner material.
I sourced the material on E-bay. Search "Headliner Fabric"
As was said above the problem isn't the glue, it's the foam...
Forum: The 75 and ZT Owners Club General Forum 6th October 2019, 00:07
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
After all the work I have done on my ZT lately I...

After all the work I have done on my ZT lately I have taken the weekend off.
Well, almost!
The big job of the day was replacing the seals on my header tank pressure cap with a viton seal kit. The...
Forum: Technical Help Forum 5th October 2019, 16:58
Replies: 1
Views: 262
Posted By Rich in Vancouver
Any brand name platinum/iridium plug should work...

Any brand name platinum/iridium plug should work well.
I just put a set of Densos in mine.
Don't cheap out as you don't want to do the job more often than necessary!

I did mine when I did my...
Forum: The 75 and ZT Owners Club General Forum 5th October 2019, 01:30
Replies: 30
Views: 2,414
Posted By Rich in Vancouver
I did the same as BigJohn. I had the floor of my...

I did the same as BigJohn. I had the floor of my new garage professionally coated with epoxy and the stuff is wonderful. I have even dropped a jackstand on the floor without any damage. I understand...
Forum: The 75 and ZT Owners Club General Forum 5th October 2019, 01:16
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
I'll bet they were Freelander parts with the...

I'll bet they were Freelander parts with the quick release fittings.
When I had my Freelander I bought a ZT thermostat by mistake and had to buy a ZT so that the parts wouldn't go to waste! :D
Forum: The 75 and ZT Owners Club General Forum 3rd October 2019, 01:54
Replies: 10
Views: 984
Posted By Rich in Vancouver
OEM implies that the parts were made by the...

OEM implies that the parts were made by the original supplier and in theory the quality should be the same. Keep in mind that most MGR parts for sale today were made long after they went bust....
Forum: The 75 and ZT Owners Club General Forum 30th September 2019, 02:23
Replies: 7
Views: 642
Posted By Rich in Vancouver
I had an annoying clunk when starting off and...

I had an annoying clunk when starting off and when stopping on my ZT190. I changed the droplinks but no improvement. I was under the car last week changing the oil and noticed that the bolts...
Forum: Technical Help Forum 24th September 2019, 02:56
Replies: 18
Views: 1,285
Posted By Rich in Vancouver
If there were a data sheet with the tensioner...

If there were a data sheet with the tensioner that would have helped as
the manuals (I had the factory manual, the Haynes manual and the factory Freelander manual open as well) say nothing about...
Forum: Technical Help Forum 23rd September 2019, 13:27
Replies: 18
Views: 1,285
Posted By Rich in Vancouver
Thanks for that Simon. I only referred to the...

Thanks for that Simon.
I only referred to the factory and Haynes manuals.:shrug:
Forum: Technical Help Forum 23rd September 2019, 04:14
Replies: 18
Views: 1,285
Posted By Rich in Vancouver
Simon, what are INA Instructions? The car is...

Simon, what are INA Instructions?
The car is running great now, much better than before the belt change, but I will pull the belt cover off as soon as possible to check that the tension isn't...
Forum: The 75 and ZT Owners Club General Forum 22nd September 2019, 16:51
Replies: 15
Views: 831
Posted By Rich in Vancouver
It's becoming a problem again here in Canada. ...

It's becoming a problem again here in Canada.
Fortunately they seem to be mostly targeting jacked up pickup trucks and 4X4s as they are easy to get under and are everywhere. The F-150 pickup has...
Forum: Technical Help Forum 21st September 2019, 22:51
Replies: 18
Views: 1,285
Posted By Rich in Vancouver
The job is done and the 190 is running nice and...

The job is done and the 190 is running nice and smooth. Mind you I haven't taken it on any road runs yet so it may well blow up on me yet.
The belts that were on it were not in the greatest shape as...
Forum: The 75 and ZT Owners Club General Forum 21st September 2019, 09:07
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Thanks Brian! These cars are full of surprises....

Thanks Brian!
These cars are full of surprises. Happily I don't have cruise control. :0 so that makes the plug redundant
BTW: the car started and ran after the cam belt change which makes me very...
Forum: The 75 and ZT Owners Club General Forum 21st September 2019, 00:02
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
As my late Scouser Step-Dad would have said,...

As my late Scouser Step-Dad would have said, "What A Palaver!"
I did find the dropped hydramount nut, but it turned out to be a fluke.
I searched again this morning with no luck, so dismantled the...
Forum: The 75 and ZT Owners Club General Forum 20th September 2019, 19:00
Replies: 4
Views: 493
Posted By Rich in Vancouver
That remains to be seen!

That remains to be seen!
Forum: The 75 and ZT Owners Club General Forum 20th September 2019, 05:34
Replies: 4
Views: 493
Posted By Rich in Vancouver
You must have it set on "REMAIN"

You must have it set on "REMAIN"
Forum: The 75 and ZT Owners Club General Forum 20th September 2019, 05:30
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Did you ever have one of those frustrating days? ...

Did you ever have one of those frustrating days?
Today, working on my ZT things went well, I removed the cam covers and resealed the gaskets, installed a new set of metal engine coolant pipes and...
Forum: The 75 and ZT Owners Club General Forum 18th September 2019, 00:20
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Believe it or not there was a tampon in there as...

Believe it or not there was a tampon in there as well (New in the wrapper)
I wonder what the story was behind that?
Forum: Technical Help Forum 17th September 2019, 16:17
Replies: 18
Views: 1,285
Posted By Rich in Vancouver
The mileage is quite low, currently 119,000km...

The mileage is quite low, currently 119,000km 115,000 when I got it in July.
I don't have any service records but there was a sticker under the bonnet from a Mazda dealer in Rotterdam that makes me...
Forum: Technical Help Forum 17th September 2019, 05:42
Replies: 18
Views: 1,285
Posted By Rich in Vancouver
I made a start on the cam belts today. Everything...

I made a start on the cam belts today. Everything that needs to be stripped off is off and tomorrow the new belts and other parts go on.
It's a good thing I had my self appointed 4000RPM rev limit...
Forum: The 75 and ZT Owners Club General Forum 17th September 2019, 05:07
Replies: 11,760
Views: 824,409
Posted By Rich in Vancouver
Doing the timing belts on my ZT190 today. Good...

Doing the timing belts on my ZT190 today.
Good progress made with everything apart and ready to put the new bits in tomorrow.
One nice surprise is what fell out when the wheelarch liner was...
Forum: Technical Help Forum 14th September 2019, 22:38
Replies: 11
Views: 503
Posted By Rich in Vancouver
WOW! Gives me a bit more respect for the humble...

WOW!
Gives me a bit more respect for the humble slave cylinder.
Yet another system on a car that operates under very harsh conditions.
Forum: Technical Help Forum 14th September 2019, 16:12
Replies: 19
Views: 1,339
Posted By Rich in Vancouver
Those 4 pins don't look all that strong. They...

Those 4 pins don't look all that strong. They would be strong enough for someone doing them up properly using a torque wrench but an air gun in the hands of a tireman in a hurry would make short work...
Showing results 1 to 150 of 356

 
Forum Jump

All times are GMT +1. The time now is 03:39.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Copyright © 2006-2020, The Rover 75 & MG ZT Owners Club Ltd